[PATCH 6/9] xhci: Set route string for all devices.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The xHCI driver needs to set the route string in the slot context of all
devices, not just SuperSpeed devices.  The route string concept was added
in the USB 3.0 specification, section 10.1.3.2.  Each hub in the topology
is expected to have no more than 15 ports in order for the route string of
a device to be unique.  SuperSpeed hubs are restricted to only having 15
ports, but FS/LS/HS hubs are not.  The xHCI specification says that if the
port number the device is under is greater than 15, that portion of the
route string shall be set to 15.

Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
---
 drivers/usb/core/usb.c      |    9 +++++++--
 drivers/usb/host/xhci-mem.c |    2 +-
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index a26f738..0bb2813 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -413,8 +413,13 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 		} else {
 			snprintf(dev->devpath, sizeof dev->devpath,
 				"%s.%d", parent->devpath, port1);
-			dev->route = parent->route +
-				(port1 << ((parent->level - 1)*4));
+			/* Route string assumes hubs have less than 16 ports */
+			if (port1 < 15)
+				dev->route = parent->route +
+					(port1 << ((parent->level - 1)*4));
+			else
+				dev->route = parent->route +
+					(15 << ((parent->level - 1)*4));
 		}
 
 		dev->dev.parent = &parent->dev;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 6e6797a..e046f0f 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -360,9 +360,9 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	/* 3) Only the control endpoint is valid - one endpoint context */
 	slot_ctx->dev_info |= LAST_CTX(1);
 
+	slot_ctx->dev_info |= (u32) udev->route;
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		slot_ctx->dev_info |= (u32) udev->route;
 		slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
 		break;
 	case USB_SPEED_HIGH:
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux