Use reset_control_rearm() call if an error occurs in case phy_meson8b_usb2_power_on() fails after reset() has been called, or in case phy_meson8b_usb2_power_off() is called i.e the resource is no longer used and the reset line may be triggered again by other devices. reset_control_rearm() keeps use of triggered_count sane in the reset framework, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx> Reported-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> --- drivers/phy/amlogic/phy-meson8b-usb2.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c index 77e7e9b1428c..dd96763911b8 100644 --- a/drivers/phy/amlogic/phy-meson8b-usb2.c +++ b/drivers/phy/amlogic/phy-meson8b-usb2.c @@ -154,6 +154,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) ret = clk_prepare_enable(priv->clk_usb_general); if (ret) { dev_err(&phy->dev, "Failed to enable USB general clock\n"); + reset_control_rearm(priv->reset); return ret; } @@ -161,6 +162,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) if (ret) { dev_err(&phy->dev, "Failed to enable USB DDR clock\n"); clk_disable_unprepare(priv->clk_usb_general); + reset_control_rearm(priv->reset); return ret; } @@ -199,6 +201,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) dev_warn(&phy->dev, "USB ID detect failed!\n"); clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); + reset_control_rearm(priv->reset); return -EINVAL; } } @@ -218,6 +221,7 @@ static int phy_meson8b_usb2_power_off(struct phy *phy) clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); + reset_control_rearm(priv->reset); /* power off the PHY by putting it into reset mode */ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, -- 2.25.1