[PATCH v2] arm64: qcom: sc7280: Move USB2 controller nodes from common dtsi to SKU1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move USB2 controller and phy nodes from common dtsi file as it is
required only for SKU1 board and change the mode to host mode as
it will be used in host mode for SKU1.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
---
v2:
Squashed the two patches in v1 and changed the commit message.

 arch/arm64/boot/dts/qcom/sc7280-idp.dts  | 16 ++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 16 ----------------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 9b991ba..ffd483d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -80,3 +80,19 @@
 		qcom,pre-scaling = <1 1>;
 	};
 };
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l10c_0p8>;
+	vdda33-supply = <&vreg_l2b_3p0>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71..c54ad62 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -398,22 +398,6 @@
 	vdda-pll-supply = <&vreg_l1b_0p8>;
 };
 
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_2_hsphy {
-	status = "okay";
-
-	vdda-pll-supply = <&vreg_l10c_0p8>;
-	vdda33-supply = <&vreg_l2b_3p0>;
-	vdda18-supply = <&vreg_l1c_1p8>;
-};
-
 &uart7 {
 	status = "okay";
 
-- 
2.7.4




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux