Hi,
Op 22-11-2021 om 19:44 schreef Martyn Welch:
The smsc95xx driver is dropping phy speed settings and causing a stack
trace at device unbind:
[ 536.379147] smsc95xx 2-1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.2-1, smsc95xx USB 2.0 Ethernet
[ 536.425029] ------------[ cut here ]------------
[ 536.429650] WARNING: CPU: 0 PID: 439 at fs/kernfs/dir.c:1535 kernfs_remove_by_name_ns+0xb8/0xc0
[ 536.438416] kernfs: can not remove 'attached_dev', no directory
[ 536.444363] Modules linked in: xts dm_crypt dm_mod atmel_mxt_ts smsc95xx usbnet
[ 536.451748] CPU: 0 PID: 439 Comm: sh Tainted: G W 5.15.0 #1
[ 536.458636] Hardware name: Freescale i.MX53 (Device Tree Support)
[ 536.464735] Backtrace:
[ 536.467190] [<80b1c904>] (dump_backtrace) from [<80b1cb48>] (show_stack+0x20/0x24)
[ 536.474787] r7:000005ff r6:8035b294 r5:600f0013 r4:80d8af78
[ 536.480449] [<80b1cb28>] (show_stack) from [<80b1f764>] (dump_stack_lvl+0x48/0x54)
[ 536.488035] [<80b1f71c>] (dump_stack_lvl) from [<80b1f788>] (dump_stack+0x18/0x1c)
[ 536.495620] r5:00000009 r4:80d9b820
[ 536.499198] [<80b1f770>] (dump_stack) from [<80124fac>] (__warn+0xfc/0x114)
[ 536.506187] [<80124eb0>] (__warn) from [<80b1d21c>] (warn_slowpath_fmt+0xa8/0xdc)
[ 536.513688] r7:000005ff r6:80d9b820 r5:80d9b8e0 r4:83744000
[ 536.519349] [<80b1d178>] (warn_slowpath_fmt) from [<8035b294>] (kernfs_remove_by_name_ns+0xb8/0xc0)
[ 536.528416] r9:00000001 r8:00000000 r7:824926dc r6:00000000 r5:80df6c2c r4:00000000
[ 536.536162] [<8035b1dc>] (kernfs_remove_by_name_ns) from [<80b1f56c>] (sysfs_remove_link+0x4c/0x50)
[ 536.545225] r6:7f00f02c r5:80df6c2c r4:83306400
[ 536.549845] [<80b1f520>] (sysfs_remove_link) from [<806f9c8c>] (phy_detach+0xfc/0x11c)
[ 536.557780] r5:82492000 r4:83306400
[ 536.561359] [<806f9b90>] (phy_detach) from [<806f9cf8>] (phy_disconnect+0x4c/0x58)
[ 536.568943] r7:824926dc r6:7f00f02c r5:82492580 r4:83306400
[ 536.574604] [<806f9cac>] (phy_disconnect) from [<7f00a310>] (smsc95xx_disconnect_phy+0x30/0x38 [smsc95xx])
[ 536.584290] r5:82492580 r4:82492580
[ 536.587868] [<7f00a2e0>] (smsc95xx_disconnect_phy [smsc95xx]) from [<7f001570>] (usbnet_stop+0x70/0x1a0 [usbnet])
[ 536.598161] r5:82492580 r4:82492000
[ 536.601740] [<7f001500>] (usbnet_stop [usbnet]) from [<808baa70>] (__dev_close_many+0xb4/0x12c)
[ 536.610466] r8:83744000 r7:00000000 r6:83744000 r5:83745b74 r4:82492000
[ 536.617170] [<808ba9bc>] (__dev_close_many) from [<808bab78>] (dev_close_many+0x90/0x120)
[ 536.625365] r7:00000001 r6:83745b74 r5:83745b8c r4:82492000
[ 536.631026] [<808baae8>] (dev_close_many) from [<808bf408>] (unregister_netdevice_many+0x15c/0x704)
[ 536.640094] r9:00000001 r8:81130b98 r7:83745b74 r6:83745bc4 r5:83745b8c r4:82492000
[ 536.647840] [<808bf2ac>] (unregister_netdevice_many) from [<808bfa50>] (unregister_netdevice_queue+0xa0/0xe8)
[ 536.657775] r10:8112bcc0 r9:83306c00 r8:83306c80 r7:8291e420 r6:83744000 r5:00000000
[ 536.665608] r4:82492000
[ 536.668143] [<808bf9b0>] (unregister_netdevice_queue) from [<808bfac0>] (unregister_netdev+0x28/0x30)
[ 536.677381] r6:7f01003c r5:82492000 r4:82492000
[ 536.682000] [<808bfa98>] (unregister_netdev) from [<7f000b40>] (usbnet_disconnect+0x64/0xdc [usbnet])
[ 536.691241] r5:82492000 r4:82492580
[ 536.694819] [<7f000adc>] (usbnet_disconnect [usbnet]) from [<8076b958>] (usb_unbind_interface+0x80/0x248)
[ 536.704406] r5:7f01003c r4:83306c80
[ 536.707984] [<8076b8d8>] (usb_unbind_interface) from [<8061765c>] (device_release_driver_internal+0x1c4/0x1cc)
[ 536.718005] r10:8112bcc0 r9:80dff1dc r8:83306c80 r7:83744000 r6:7f01003c r5:00000000
[ 536.725838] r4:8291e420
[ 536.728373] [<80617498>] (device_release_driver_internal) from [<80617684>] (device_release_driver+0x20/0x24)
[ 536.738302] r7:83744000 r6:810d4f4c r5:8291e420 r4:8176ae30
[ 536.743963] [<80617664>] (device_release_driver) from [<806156cc>] (bus_remove_device+0xf0/0x148)
[ 536.752858] [<806155dc>] (bus_remove_device) from [<80610018>] (device_del+0x198/0x41c)
[ 536.760880] r7:83744000 r6:8116e2e4 r5:8291e464 r4:8291e420
[ 536.766542] [<8060fe80>] (device_del) from [<80768fe8>] (usb_disable_device+0xcc/0x1e0)
[ 536.774576] r10:8112bcc0 r9:80dff1dc r8:00000001 r7:8112bc48 r6:8291e400 r5:00000001
[ 536.782410] r4:83306c00
[ 536.784945] [<80768f1c>] (usb_disable_device) from [<80769c30>] (usb_set_configuration+0x514/0x8dc)
[ 536.794011] r10:00000000 r9:00000000 r8:832c3600 r7:00000004 r6:810d5688 r5:00000000
[ 536.801844] r4:83306c00
[ 536.804379] [<8076971c>] (usb_set_configuration) from [<80775fac>] (usb_generic_driver_disconnect+0x34/0x38)
[ 536.814236] r10:832c3610 r9:83745ef8 r8:832c3600 r7:00000004 r6:810d5688 r5:83306c00
[ 536.822069] r4:83306c00
[ 536.824605] [<80775f78>] (usb_generic_driver_disconnect) from [<8076b850>] (usb_unbind_device+0x30/0x70)
[ 536.834100] r5:83306c00 r4:810d5688
[ 536.837678] [<8076b820>] (usb_unbind_device) from [<8061765c>] (device_release_driver_internal+0x1c4/0x1cc)
[ 536.847432] r5:822fb480 r4:83306c80
[ 536.851009] [<80617498>] (device_release_driver_internal) from [<806176a8>] (device_driver_detach+0x20/0x24)
[ 536.860853] r7:00000004 r6:810d4f4c r5:810d5688 r4:83306c80
[ 536.866515] [<80617688>] (device_driver_detach) from [<80614d98>] (unbind_store+0x70/0xe4)
[ 536.874793] [<80614d28>] (unbind_store) from [<80614118>] (drv_attr_store+0x30/0x3c)
[ 536.882554] r7:00000000 r6:00000000 r5:83739200 r4:80614d28
[ 536.888217] [<806140e8>] (drv_attr_store) from [<8035cb68>] (sysfs_kf_write+0x48/0x54)
[ 536.896154] r5:83739200 r4:806140e8
[ 536.899732] [<8035cb20>] (sysfs_kf_write) from [<8035be84>] (kernfs_fop_write_iter+0x11c/0x1d4)
[ 536.908446] r5:83739200 r4:00000004
[ 536.912024] [<8035bd68>] (kernfs_fop_write_iter) from [<802b87fc>] (vfs_write+0x258/0x3e4)
[ 536.920317] r10:00000000 r9:83745f58 r8:83744000 r7:00000000 r6:00000004 r5:00000000
[ 536.928151] r4:82adacc0
[ 536.930687] [<802b85a4>] (vfs_write) from [<802b8b0c>] (ksys_write+0x74/0xf4)
[ 536.937842] r10:00000004 r9:007767a0 r8:83744000 r7:00000000 r6:00000000 r5:82adacc0
[ 536.945676] r4:82adacc0
[ 536.948213] [<802b8a98>] (ksys_write) from [<802b8ba4>] (sys_write+0x18/0x1c)
[ 536.955367] r10:00000004 r9:83744000 r8:80100244 r7:00000004 r6:76f47b58 r5:76fc0350
[ 536.963200] r4:00000004
[ 536.965735] [<802b8b8c>] (sys_write) from [<80100060>] (ret_fast_syscall+0x0/0x48)
[ 536.973320] Exception stack(0x83745fa8 to 0x83745ff0)
[ 536.978383] 5fa0: 00000004 76fc0350 00000001 007767a0 00000004 00000000
[ 536.986569] 5fc0: 00000004 76fc0350 76f47b58 00000004 76f47c7c 76f48114 00000000 7e87991c
[ 536.994753] 5fe0: 00000498 7e879908 76e6dce8 76eca2e8
[ 536.999922] ---[ end trace 9b835d809816b435 ]---
I am testing this patch on Intel Edison-Arduino with Linux 5.15.1.
I had reported this issue earlier as
https://lore.kernel.org/linux-usb/07628a9b-1370-98b7-c1f3-98b9bf8cc38f@xxxxxxxxx/
This patch indeed resolves the above crash on each unplug.
The driver should not be connecting and disconnecting the PHY when the
device is opened and closed, it should be stopping and starting the PHY. The
phy should be connected as part of binding and disconnected during
unbinding.
As this results in the PHY not being reset during open, link speed, etc.
settings set prior to the link coming up are now not being lost.
It is necessary for phy_stop() to only be called when the phydev still
exists (resolving the above stack trace). When unbinding, ".unbind" will be
called prior to ".stop", with phy_disconnect() already having called
phy_stop() before the phydev becomes inaccessible.
The patch introduces a new error on each unplug:
usb 1-1: USB disconnect, device number 2
usb 1-1.1: USB disconnect, device number 3
smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-xhci-hcd.1.auto-1.1,
smsc95xx USB 2.0 Ethernet
smsc95xx 1-1.1:1.0 eth0: Link is Down
smsc95xx 1-1.1:1.0 eth0: Failed to read reg index 0x00000114: -19
smsc95xx 1-1.1:1.0 eth0: Error reading MII_ACCESS
smsc95xx 1-1.1:1.0 eth0: __smsc95xx_mdio_read: MII is busy
smsc95xx 1-1.1:1.0 eth0: Failed to read reg index 0x00000114: -19
smsc95xx 1-1.1:1.0 eth0: Error reading MII_ACCESS
smsc95xx 1-1.1:1.0 eth0: __smsc95xx_mdio_read: MII is busy
smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Also as reported earlier, (only) on first plug the more worrying but
possibly unrelated crash still happens:
------------[ cut here ]------------
DMA-API: xhci-hcd xhci-hcd.1.auto: cacheline tracking EEXIST,
overlapping mappings aren't supported
WARNING: CPU: 0 PID: 23 at kernel/dma/debug.c:570 add_dma_entry+0x1d9/0x270
Modules linked in: rfcomm iptable_nat bnep usb_f_uac2 u_audio
snd_sof_nocodec usb_f_mass_storage usb_f_eem u_ether spi_pxa2xx_platform
dw_dmac usb_f_serial u_serial libcomposite intel_mrfld_pwrbtn
snd_sof_pci_intel_tng pwm_lpss_pci intel_mrfld_adc pwm_lpss snd_sof_pci
snd_sof_intel_ipc snd_sof_intel_atom dw_dmac_pci dw_dmac_core snd_sof
snd_sof_xtensa_dsp snd_soc_acpi spi_pxa2xx_pci brcmfmac brcmutil
hci_uart leds_gpio btbcm ti_ads7950 industrialio_triggered_buffer
kfifo_buf tun ledtrig_timer ledtrig_heartbeat mmc_block
extcon_intel_mrfld sdhci_pci cqhci sdhci led_class mmc_core
intel_soc_pmic_mrfld btrfs libcrc32c xor zstd_compress zlib_deflate raid6_pq
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.15.1-edison-acpi-standard #1
Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542
2015.01.21:18.19.48
Workqueue: usb_hub_wq hub_event
RIP: 0010:add_dma_entry+0x1d9/0x270
Code: ff 0f 84 97 00 00 00 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 39 ff
52 00 48 89 c6 4c 89 e2 48 c7 c7 f0 ab e7 a7 e8 c7 5c b5 00 <0f> 0b 48
85 ed 0f 85 a4 b3 b5 00 8b 05 46 38 9f 01 85 c0 0f 85 df
RSP: 0000:ffffb047400cfac8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 00000000ffffffff RCX: ffff9e25fe217478
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9e25fe217470
RBP: ffff9e25c12ff780 R08: ffffffffa83359a8 R09: 0000000000009ffb
R10: 00000000ffffe000 R11: 3fffffffffffffff R12: ffff9e25c8a24040
R13: 0000000000000001 R14: 0000000000000206 R15: 00000000000f8be4
FS: 0000000000000000(0000) GS:ffff9e25fe200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f62c6d586d8 CR3: 0000000002f3c000 CR4: 00000000001006f0
Call Trace:
dma_map_page_attrs+0xfb/0x250
? usb_hcd_link_urb_to_ep+0x14/0xa0
usb_hcd_map_urb_for_dma+0x3b1/0x4e0
usb_hcd_submit_urb+0x93/0xbb0
? create_prof_cpu_mask+0x20/0x20
? arch_stack_walk+0x73/0xf0
? usb_hcd_link_urb_to_ep+0x14/0xa0
? prepare_transfer+0xff/0x140
usb_start_wait_urb+0x60/0x160
usb_control_msg+0xda/0x140
hub_ext_port_status+0x82/0x100
hub_event+0x1b1/0x1830
? hub_activate+0x58c/0x860
process_one_work+0x1d4/0x370
worker_thread+0x48/0x3d0
? rescuer_thread+0x360/0x360
kthread+0x122/0x140
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
---[ end trace da6ffcd9fad23a74 ]---
DMA-API: Mapped at:
debug_dma_map_page+0x60/0xf0
dma_map_page_attrs+0xfb/0x250
usb_hcd_map_urb_for_dma+0x3b1/0x4e0
usb_hcd_submit_urb+0x93/0xbb0
usb_start_wait_urb+0x60/0x160
usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00,
bcdDevice= 2.00
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: LAN9514
usb 1-1.1: Manufacturer: SMSC
usb 1-1.1: SerialNumber: 00951d0d
Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
Cc: Steve Glendinning <steve.glendinning@xxxxxxxxxxx>
Cc: UNGLinuxDriver@xxxxxxxxxxxxx
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: stable@xxxxxxxxxx # v5.15
---
drivers/net/usb/smsc95xx.c | 55 ++++++++++++++++++--------------------
1 file changed, 26 insertions(+), 29 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 26b1bd8e845b..f91dabd65ecd 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1049,6 +1049,14 @@ static const struct net_device_ops smsc95xx_netdev_ops = {
.ndo_set_features = smsc95xx_set_features,
};
+static void smsc95xx_handle_link_change(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ phy_print_status(net->phydev);
+ usbnet_defer_kevent(dev, EVENT_LINK_CHANGE);
+}
+
static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
{
struct smsc95xx_priv *pdata;
@@ -1153,6 +1161,17 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->min_mtu = ETH_MIN_MTU;
dev->net->max_mtu = ETH_DATA_LEN;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+ ret = phy_connect_direct(dev->net, pdata->phydev,
+ &smsc95xx_handle_link_change,
+ PHY_INTERFACE_MODE_MII);
+ if (ret) {
+ netdev_err(dev->net, "can't attach PHY to %s\n", pdata->mdiobus->id);
+ goto unregister_mdio;
+ }
+
+ phy_attached_info(dev->net->phydev);
+
return 0;
unregister_mdio:
@@ -1170,47 +1189,25 @@ static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
{
struct smsc95xx_priv *pdata = dev->driver_priv;
+ phy_disconnect(dev->net->phydev);
mdiobus_unregister(pdata->mdiobus);
mdiobus_free(pdata->mdiobus);
netif_dbg(dev, ifdown, dev->net, "free pdata\n");
kfree(pdata);
}
-static void smsc95xx_handle_link_change(struct net_device *net)
-{
- struct usbnet *dev = netdev_priv(net);
-
- phy_print_status(net->phydev);
- usbnet_defer_kevent(dev, EVENT_LINK_CHANGE);
-}
-
static int smsc95xx_start_phy(struct usbnet *dev)
{
- struct smsc95xx_priv *pdata = dev->driver_priv;
- struct net_device *net = dev->net;
- int ret;
+ phy_start(dev->net->phydev);
- ret = smsc95xx_reset(dev);
- if (ret < 0)
- return ret;
-
- ret = phy_connect_direct(net, pdata->phydev,
- &smsc95xx_handle_link_change,
- PHY_INTERFACE_MODE_MII);
- if (ret) {
- netdev_err(net, "can't attach PHY to %s\n", pdata->mdiobus->id);
- return ret;
- }
-
- phy_attached_info(net->phydev);
- phy_start(net->phydev);
return 0;
}
-static int smsc95xx_disconnect_phy(struct usbnet *dev)
+static int smsc95xx_stop(struct usbnet *dev)
{
- phy_stop(dev->net->phydev);
- phy_disconnect(dev->net->phydev);
+ if (dev->net->phydev)
+ phy_stop(dev->net->phydev);
+
return 0;
}
@@ -1965,7 +1962,7 @@ static const struct driver_info smsc95xx_info = {
.unbind = smsc95xx_unbind,
.link_reset = smsc95xx_link_reset,
.reset = smsc95xx_start_phy,
- .stop = smsc95xx_disconnect_phy,
+ .stop = smsc95xx_stop,
.rx_fixup = smsc95xx_rx_fixup,
.tx_fixup = smsc95xx_tx_fixup,
.status = smsc95xx_status,
