On Wed, Nov 24, 2021 at 02:40:36PM -0800, Badhri Jagan Sridharan wrote:
> Stub from the spec:
> "4.5.2.2.4.2 Exiting from AttachWait.SNK State
> A Sink shall transition to Unattached.SNK when the state of both
> the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
> A DRP shall transition to Unattached.SRC when the state of both
> the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."
>
> This change makes TCPM to wait in SNK_DEBOUNCED state until
> CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously,
> TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON.
> This causes TCPM to loop continuously when connected to a
> faulty power source that does not present vbus. Waiting in
> SNK_DEBOUNCED also ensures that TCPM is adherant to
> "4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements.
>
> [ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
> [ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
> [ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
> [ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected]
> [ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
> [ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
> [ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
> [ 6169.931296] disable vbus discharge ret:0
> [ 6169.931301] Setting usb_comm capable false
> [ 6169.932783] Setting voltage/current limit 0 mV 0 mA
> [ 6169.932802] polarity 0
> [ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0
> [ 6169.936689] cc:=0
> [ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
> [ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
> [ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
> [ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS]
> [ 6170.036896] Start toggling
> [ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
> [ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
> [ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
> [ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
> [ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
> [ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
> [ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
> [ 6170.693304] disable vbus discharge ret:0
> [ 6170.693308] Setting usb_comm capable false
> [ 6170.695193] Setting voltage/current limit 0 mV 0 mA
> [ 6170.695210] polarity 0
> [ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0
> [ 6170.701896] cc:=0
> [ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
> [ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
>
> Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)")
> Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
> ---
> drivers/usb/typec/tcpm/tcpm.c | 4 ----
> 1 file changed, 4 deletions(-)
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.
</formletter>
