El 24/11/21 a las 19:26, Greg Kroah-Hartman escribió:
> On Wed, Nov 24, 2021 at 05:37:05PM +0100, Francisco Blas Izquierdo Riera (klondike) wrote:
>> Currently, the vendor ID reported by the chipset is checked before to
>> avoid accidentally programming devices from unsupported vendors with
>> a different NVM structure.
>>
>> Certain Thunderbolt devices store the vendor ID in the NVM, therefore
>> if the NVM has become corrrupted the device will report an invalid
>> vendor ID and reflashing will be impossible on GNU/Linux even if the
>> device can boot in safe mode.
>>
>> This patch adds a new parameter ``switch_nvm_vendor_override`` which
>> can be used to override the vendor ID used for detecting the NVM
>> structure allowing to reflash (and authenticate) a new, valid
>> image on the device.
>>
>> Signed-off-by: Francisco Blas Izquierdo Riera (klondike) <klondike@xxxxxxxxxxx>
>> ---
>> drivers/thunderbolt/switch.c | 9 ++++++++-
>> 1 file changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
>> index 3014146081..a7959c3f3f 100644
>> --- a/drivers/thunderbolt/switch.c
>> +++ b/drivers/thunderbolt/switch.c
>> @@ -13,6 +13,7 @@
>> #include <linux/sched/signal.h>
>> #include <linux/sizes.h>
>> #include <linux/slab.h>
>> +#include <linux/moduleparam.h>
>> #include "tb.h"
>> @@ -34,6 +35,10 @@ struct nvm_auth_status {
>> static LIST_HEAD(nvm_auth_status_cache);
>> static DEFINE_MUTEX(nvm_auth_status_lock);
>> +static short switch_nvm_vendor_override = -1;
>> +module_param(switch_nvm_vendor_override, short, 0440);
>> +MODULE_PARM_DESC(switch_nvm_vendor_override, "Override the switch vendor id on the nvm access routines");
>> +
>> static struct nvm_auth_status *__nvm_get_auth_status(const struct tb_switch *sw)
>> {
>> struct nvm_auth_status *st;
>> @@ -391,7 +396,9 @@ static int tb_switch_nvm_add(struct tb_switch *sw)
>> * relax this in the future when we learn other NVM formats.
>> */
>> if (sw->config.vendor_id != PCI_VENDOR_ID_INTEL &&
>> - sw->config.vendor_id != 0x8087) {
>> + sw->config.vendor_id != 0x8087 &&
>> + switch_nvm_vendor_override != PCI_VENDOR_ID_INTEL &&
>> + switch_nvm_vendor_override != 0x8087) {
>> dev_info(&sw->dev,
>> "NVM format of vendor %#x is not known, disabling NVM upgrade\n",
>> sw->config.vendor_id);
> Patch is corrupted :(
>
> Anyway, module parameters are from the 1990's and should stay there.
> Please use a per-device way to handle this instead, as trying to handle
> module parameters is very difficult over time.
>
> thanks,
>
> greg k-h
Hi Greg!
Thanks for your feedback. I'm a bit uncertain about what you mean with a per-device way. Do you mean through the sysfs interface? If so how to do so on device discovery time (which is what the Thunderbolt driver does)?
I'm surely missing something here so I would really appreciate a pointer in the right direction.
Francisco
Attachment:
OpenPGP_0x5608AEA28AAFC0EC_and_old_rev.asc
Description: OpenPGP public key
Attachment:
OpenPGP_signature
Description: OpenPGP digital signature
