SL811 Device detected after removal used to be working in linux-2.6.22
but then broke somewhere between 2.6.22 and 2.6.28. Current
hub_port_connect_change() in drivers/usb/core/hub.c won't call
usb_disconnect() in case the SL811 driver sets portstatus
USB_PORT_FEAT_CONNECTION upon removal.
AFAIK the SL811 has only a combined Device Insert/Remove
detection bit, therefore use a count to distinguish insert or remove.
Signed-Off-By: Michael Hennerich <hennerich@xxxxxxxxxxxxxxxxxxxx>
---
drivers/usb/host/sl811-hcd.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 1ad9c1b..34c3971 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -720,8 +720,12 @@ retry:
/* port status seems weird until after reset, so
* force the reset and make khubd clean up later.
*/
- sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
- | (1 << USB_PORT_FEAT_CONNECTION);
+ if (sl811->stat_insrmv & 1)
+ sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
+ else
+ sl811->port1 &= ~(1 <<
USB_PORT_FEAT_CONNECTION);
+
+ sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
} else if (irqstat & SL11H_INTMASK_RD) {
if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) {
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
