Copy the otg-rev property documentation from usb-drd.yaml into the DWC2
binding document, since some users of the DWC2 IP like STM32MP1 use the
otg-rev property in DT bindings for this controller.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
NOTE: Shouldn't this somehow be part of the USB core bindings instead?
---
Documentation/devicetree/bindings/usb/dwc2.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 10c7d9b6cc53f..254436c19870b 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -120,6 +120,16 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+ otg-rev:
+ description:
+ Tells usb driver the release number of the OTG and EH supplement with
+ which the device and its descriptors are compliant, in binary-coded
+ decimal (i.e. 2.0 is 0200H). This property is used if any real OTG
+ features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be
+ 0x0200 or above.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0x0100, 0x0120, 0x0130, 0x0200]
+
snps,need-phy-for-wake:
$ref: /schemas/types.yaml#/definitions/flag
description: If present indicates that the phy needs to be left on for
--
2.33.0
