[ Adding back the lists on CC so that this gets archived. ] On Sat, Oct 09, 2021 at 01:50:40PM +0800, Yu-Tung Chang wrote: > Yu-Tung Chang <mtwget@xxxxxxxxx> 于2021年10月9日周六 下午1:39写道： > > > > Johan Hovold <johan@xxxxxxxxxx> 于2021年10月7日周四 下午3:57写道： > > > > > > On Thu, Oct 07, 2021 at 09:47:28AM +0200, Johan Hovold wrote: > > > > On Thu, Sep 30, 2021 at 10:11:12AM +0800, Yu-Tung Chang wrote: > > > > > Add usb product id of the Quectel EC200S-CN module. > > > > > > > > > > usb-devices output for 0x6002: > > > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 > > > > > D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > > > > > P: Vendor=2c7c ProdID=6002 Rev=03.18 > > > > > S: Manufacturer=Android > > > > > S: Product=Android > > > > > S: SerialNumber=0000 > > > > > C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA > > > > > I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether > > > > > I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether > > > > > I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > > > > > I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > > > > > I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > > > > > > > > Looks good now, but for completeness, could you also mention here what > > > > the three ports are used for (and which is which)? > > > > > > I've applied the patch now, so no need to resend, but please list the > > > three ports in a reply if you have that information. > > > > ttyUSB0 used for debugging, ttyUSB1 used for AT commands, > > ttyUSB2 used for PPP dialing. > and lsusb.py -i -e output info: > 1-1 2c7c:6002 ef 5IFs [USB 2.00, 480 Mbps, 500mA] > (Android Android 0000) > (EP) 00: Control attr 00 len 07 max 040 > 1-1:1.0 (IF) 02:06:00 1EP (Communications) cdc_ether net/usb0 > (EP) 87: Interrupt (4096ms) attr 03 len 07 max 040 > 1-1:1.1 (IF) 0a:00:00 2EPs (CDC Data) cdc_ether > (EP) 83: Bulk attr 02 len 07 max 200 > (EP) 0c: Bulk attr 02 len 07 max 200 > 1-1:1.2 (IF) ff:00:00 2EPs (Vendor Specific Class) option ttyUSB0 > (EP) 0b: Bulk attr 02 len 07 max 200 > (EP) 82: Bulk attr 02 len 07 max 200 > 1-1:1.3 (IF) ff:00:00 3EPs (Vendor Specific Class) option ttyUSB1 > (EP) 89: Interrupt (4096ms) attr 03 len 07 max 040 > (EP) 86: Bulk attr 02 len 07 max 200 > (EP) 0f: Bulk attr 02 len 07 max 200 > 1-1:1.4 (IF) ff:00:00 3EPs (Vendor Specific Class) option ttyUSB2 > (EP) 81: Bulk attr 02 len 07 max 200 > (EP) 0a: Bulk attr 02 len 07 max 200 > (EP) 88: Interrupt (4096ms) attr 03 len 07 max 040 Perfect, thanks for the details. Johan
