This series adds runtime PM support to Tegra drivers and enables core
voltage scaling for Tegra20/30 SoCs, resolving overheating troubles.
All patches in this series are interdependent and should go via Tegra tree.
Changelog:
v12: - Added r-b from Rob Herring to the host1x binding patch.
- Added acks from Hans Verkuil to the video decoder patches.
- In the v11 changelog I forgot to mention that the clk-binding
patch was also changed with a corrected regex pattern and removed
'clocks' sub-node. This patch needs r-b or ack too.
- Added new "Rename 3d power domains" patch to match the DT schema
naming requirement. Thanks to David Heidelberg for spotting this
problem.
- Replaced #ifdef CONFIG_PM_SLEEP with maybe_unused in the MMC patch
to make code cleaner.
v11: - Added acks and r-b from Rob Herring, Mark Brown and Miquel Raynal
that were given to v8.
- Corrected order of the new memory controller reset entry in
device-trees and host1x DT binding patch, which was requested by
Rob Herring.
- Switched consumer drivers to use power domain state syncing done
by new Tegra's common OPP-initialization helper.
- Made use of new devm_pm_runtime_enable() helper that was added to
v5.15 kernel, where appropriate.
- Added "fuse: Use resource-managed helpers" patch.
- Converted Tegra20/30 clk drivers to a proper platform drivers,
which was requested by Thierry Reding.
- Removed clk-bulk API usage from the MMC patch, which was requested
by Thierry Reding.
- Changed CORE power domain name to "core" in a new patch
"Change name of core power domain".
- Misc small fixes for problems that I found since v8, like couple
typos in error code paths and restored working RPM for Tegra DRM
UAPI v1 that was removed in v8 by accident.
v9-v10: Figured out remaining GENPD API changes with Ulf Hansson and
Viresh Kumar. The OPP-sync helper that was used in v8 isn't needed
anymore because GENPD API now allows consumer drivers to
init rpm_pstate of power domains.
v8: - Added new generic dev_pm_opp_sync() helper that syncs OPP state with
hardware. All drivers changed to use it. This replaces GENPD attach_dev
callback hacks that were used in v7.
- Added new patch patch "soc/tegra: regulators: Prepare for suspend"
that fixes dying Tegra20 SoC after enabling VENC power domain during
resume from suspend. It matches to what downstream kernel does on
suspend/resume.
- After a second thought, I dropped patches which added RPM to memory
drivers since hardware is always-on and RPM not needed.
- Replaced the "dummy host1x driver" patch with new "Disable unused
host1x hardware" patch, since it's a cleaner solution.
Dmitry Osipenko (35):
opp: Change type of dev_pm_opp_attach_genpd(names) argument
soc/tegra: Add devm_tegra_core_dev_init_opp_table_common()
soc/tegra: pmc: Disable PMC state syncing
soc/tegra: Don't print error message when OPPs not available
dt-bindings: clock: tegra-car: Document new clock sub-nodes
clk: tegra: Support runtime PM and power domain
dt-bindings: host1x: Document OPP and power domain properties
dt-bindings: host1x: Document Memory Client resets of Host1x, GR2D and
GR3D
gpu: host1x: Add runtime PM and OPP support
gpu: host1x: Add host1x_channel_stop()
drm/tegra: dc: Support OPP and SoC core voltage scaling
drm/tegra: hdmi: Add OPP support
drm/tegra: gr2d: Support generic power domain and runtime PM
drm/tegra: gr3d: Support generic power domain and runtime PM
drm/tegra: vic: Support system suspend
usb: chipidea: tegra: Add runtime PM and OPP support
bus: tegra-gmi: Add runtime PM and OPP support
pwm: tegra: Add runtime PM and OPP support
mmc: sdhci-tegra: Add runtime PM and OPP support
mtd: rawnand: tegra: Add runtime PM and OPP support
spi: tegra20-slink: Add OPP support
media: dt: bindings: tegra-vde: Convert to schema
media: dt: bindings: tegra-vde: Document OPP and power domain
media: staging: tegra-vde: Support generic power domain
soc/tegra: fuse: Reset hardware
soc/tegra: fuse: Use resource-managed helpers
soc/tegra: regulators: Prepare for suspend
soc/tegra: pmc: Rename 3d power domains
soc/tegra: pmc: Rename core power domain
soc/tegra: pmc: Enable core domain support for Tegra20 and Tegra30
ARM: tegra: Add OPP tables and power domains to Tegra20 device-trees
ARM: tegra: Add OPP tables and power domains to Tegra30 device-trees
ARM: tegra: Add Memory Client resets to Tegra20 GR2D, GR3D and Host1x
ARM: tegra: Add Memory Client resets to Tegra30 GR2D, GR3D and Host1x
ARM: tegra20/30: Disable unused host1x hardware
.../bindings/clock/nvidia,tegra20-car.yaml | 37 +
.../display/tegra/nvidia,tegra20-host1x.txt | 53 +
.../bindings/media/nvidia,tegra-vde.txt | 64 -
.../bindings/media/nvidia,tegra-vde.yaml | 119 ++
.../boot/dts/tegra20-acer-a500-picasso.dts | 1 +
arch/arm/boot/dts/tegra20-colibri.dtsi | 3 +-
arch/arm/boot/dts/tegra20-harmony.dts | 3 +-
arch/arm/boot/dts/tegra20-paz00.dts | 1 +
.../arm/boot/dts/tegra20-peripherals-opp.dtsi | 941 +++++++++++
arch/arm/boot/dts/tegra20-seaboard.dts | 3 +-
arch/arm/boot/dts/tegra20-tamonten.dtsi | 3 +-
arch/arm/boot/dts/tegra20-trimslice.dts | 9 +
arch/arm/boot/dts/tegra20-ventana.dts | 1 +
arch/arm/boot/dts/tegra20.dtsi | 116 +-
.../tegra30-asus-nexus7-grouper-common.dtsi | 1 +
arch/arm/boot/dts/tegra30-beaver.dts | 1 +
arch/arm/boot/dts/tegra30-cardhu.dtsi | 1 +
arch/arm/boot/dts/tegra30-colibri.dtsi | 17 +-
arch/arm/boot/dts/tegra30-ouya.dts | 1 +
.../arm/boot/dts/tegra30-peripherals-opp.dtsi | 1412 +++++++++++++++++
arch/arm/boot/dts/tegra30.dtsi | 175 +-
drivers/bus/tegra-gmi.c | 52 +-
drivers/clk/tegra/Makefile | 1 +
drivers/clk/tegra/clk-device.c | 222 +++
drivers/clk/tegra/clk-pll.c | 2 +-
drivers/clk/tegra/clk-super.c | 2 +-
drivers/clk/tegra/clk-tegra20.c | 77 +-
drivers/clk/tegra/clk-tegra30.c | 116 +-
drivers/clk/tegra/clk.c | 75 +-
drivers/clk/tegra/clk.h | 2 +
drivers/gpu/drm/tegra/dc.c | 74 +
drivers/gpu/drm/tegra/dc.h | 2 +
drivers/gpu/drm/tegra/gr2d.c | 155 +-
drivers/gpu/drm/tegra/gr3d.c | 388 ++++-
drivers/gpu/drm/tegra/hdmi.c | 16 +-
drivers/gpu/drm/tegra/vic.c | 4 +
drivers/gpu/host1x/channel.c | 8 +
drivers/gpu/host1x/debug.c | 15 +
drivers/gpu/host1x/dev.c | 151 +-
drivers/gpu/host1x/dev.h | 3 +-
drivers/gpu/host1x/hw/channel_hw.c | 44 +-
drivers/gpu/host1x/intr.c | 3 -
drivers/gpu/host1x/syncpt.c | 5 +-
drivers/mmc/host/sdhci-tegra.c | 80 +-
drivers/mtd/nand/raw/tegra_nand.c | 55 +-
drivers/opp/core.c | 6 +-
drivers/pwm/pwm-tegra.c | 88 +-
drivers/soc/tegra/common.c | 4 +-
drivers/soc/tegra/fuse/fuse-tegra.c | 51 +-
drivers/soc/tegra/fuse/fuse-tegra20.c | 33 +-
drivers/soc/tegra/fuse/fuse.h | 1 +
drivers/soc/tegra/pmc.c | 27 +-
drivers/soc/tegra/regulators-tegra20.c | 99 ++
drivers/soc/tegra/regulators-tegra30.c | 122 ++
drivers/spi/spi-tegra20-slink.c | 10 +-
drivers/staging/media/tegra-vde/vde.c | 57 +-
drivers/usb/chipidea/ci_hdrc_tegra.c | 53 +-
include/linux/host1x.h | 1 +
include/linux/pm_opp.h | 8 +-
include/soc/tegra/common.h | 24 +
60 files changed, 4741 insertions(+), 357 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
create mode 100644 Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
create mode 100644 drivers/clk/tegra/clk-device.c
--
2.32.0
