Re: [PATCH v8 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Prasad Malisetty (2021-09-17 10:15:47)
> On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src
> must be the TCXO while gdsc is enabled. After PHY init successful
> clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src.
>
> Signed-off-by: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
> ---

One nit below

Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>

> @@ -1488,7 +1553,9 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>
>         pcie->pci = pci;
>
> -       pcie->ops = of_device_get_match_data(dev);
> +       pcie_cfg = of_device_get_match_data(dev);
> +       pcie->ops = pcie_cfg->ops;

Maybe worth failing probe with if (!pcie->ops) just to be a little
nicer here.

> +       pcie->pipe_clk_need_muxing = pcie_cfg->pipe_clk_need_muxing;
>
>         pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
>         if (IS_ERR(pcie->reset)) {



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux