For Isochronous endpoints, the SS companion descriptor's
wBytesPerInterval field is required to reserve bus time in order
to transmit the required payload during the service interval.
If left at 0, the UAC2 function is unable to transact data on its
playback or capture endpoints in SuperSpeed mode.
Since f_uac2 currently does not support any bursting this value can
be exactly equal to the calculated wMaxPacketSize.
Tested with Windows 10 as a host.
Fixes: f8cb3d556be3 ("usb: f_uac2: adds support for SS and SSP")
Signed-off-by: Jack Pham <jackp@xxxxxxxxxxxxxx>
---
v2: New patch
drivers/usb/gadget/function/f_uac2.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index d89c1ebb07f4..33d60b926bae 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -1178,6 +1178,9 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
agdev->out_ep_maxpsize = max_t(u16, agdev->out_ep_maxpsize,
le16_to_cpu(ss_epout_desc.wMaxPacketSize));
+ ss_epin_desc_comp->wBytesPerInterval = ss_epin_desc->wMaxPacketSize;
+ ss_epout_desc_comp->wBytesPerInterval = ss_epout_desc->wMaxPacketSize;
+
// HS and SS endpoint addresses are copied from autoconfigured FS descriptors
hs_ep_int_desc.bEndpointAddress = fs_ep_int_desc.bEndpointAddress;
hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
--
2.24.0
