Hi Heikki,
On 8/26/2021 7:36 PM, Heikki Krogerus wrote:
Hi Alexander,
On Wed, Aug 25, 2021 at 01:50:48PM +0000, Deucher, Alexander wrote:
I'm not a USB expert, but I think the idea was to pop up a message asking the
user what role they wanted when they plugged in USB cable? Then based on
their input, the role could be changed.
What exactly is the ACPI/EC interrupt in this case?
Note, that simply selecting one role will only work if the partner
device happens to be in the opposite role at the same time (actually,
even that may not be enough). So for example by selecting host role
will only work if the partner happens to be in device role. If the
parter is also in host role, nothing happens, or both ends just fail
to enumerate each other.
So you always have to negotiate the role with the partner one way or
the other. Now we need to understand how that negotiation is handled
(or is expected to be handled) on this platform.
Which type of connector are we talking about here? Is it USB Type-C,
or is it something else?
thanks,
Sorry for the delayed response due to few designed changes. Now we have
more clarity for the customer platform with respect to usage of DWC3
controller driver. So it is type C controller which will be using ACPI
based UCSI driver. As UCSI driver has already role switch support we may
not need this patch. However we need your input to understand this,
con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode);
For this to work, how should be ACPI entry to be defined. Do you have
sample code, we had discussion on similar point in past but still need
some clarity if we have sample ACPI ASL Code. I remember something on
this line from previous discussion with following sample code.
/*
* I2C1 is the I2C host, and PDC1 is the USB PD Controller (I2C slave
device).
*/
Scope (\_SB.PCI0.I2C1.PDC1)
{
/* Each connector should have its own ACPI device entry (node). */
Device (CON0)
{
Name (_ADR, 0)
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package() {
Package () {"usb-role-switch", \_SB.PCI0.DWC3},
}
})
}
}
So here is the another question , if we can not achieve this in BIOS ,
Can we register the software node with quirk in DWC3 controller
something like this
static const struct software_node amd_dwc3_node[] = {
{ "amd-dwc3-usb-sw", NULL, amd_dwc3_props },
{},
};
if (dwc->use_sw_node_quirk) {
ret = software_node_register_nodes(amd_dwc3_node);
if (ret)
return ret;
dwc3_role_switch.fwnode = software_node_fwnode(&amd_dwc3_node[0]);
} else {
dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
}
And in UCSI driver again with quirk,
swnode = software_node_find_by_name(NULL, "amd-dwc3-usb-sw");
fwnode = software_node_fwnode(swnode);
con->usb_role_sw = usb_role_switch_find_by_fwnode(fwnode);
Please provide your input that will help us .
Regards
Nehal
