Re: [PATCH v3 2/4] usb: dwc3: reference clock period configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Baruch Siach <baruch@xxxxxxxxxx> writes:

> From: Balaji Prakash J <bjagadee@xxxxxxxxxxxxxx>
>
> Set reference clock period when it differs from dwc3 default hardware
> set.
>
> We could calculate clock period based on reference clock frequency. But
> this information is not always available. This is the case of PCI bus
> attached USB host. For that reason we use a custom property.
>
> Tested (USB2 only) on IPQ6010 SoC based board with 24 MHz reference
> clock while hardware default is 19.2 MHz.
>
> Nacked-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Balaji Prakash J <bjagadee@xxxxxxxxxxxxxx>
> [ baruch: rewrite commit message; drop GFLADJ code; remove 'quirk-' from
>   property name; mention tested hardware ]
> Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx>

Acked-by: Felipe Balbi <balbi@xxxxxxxxxx>


-- 
balbi



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux