Aw: [PATCH v3 1/1] arm: dts: mt7623: add musb device nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tested-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

after adding nodes for r2
https://patchwork.kernel.org/project/linux-mediatek/patch/20210830145958.108605-1-linux@xxxxxxxxx/

regards Frank


> Gesendet: Sonntag, 22. August 2021 um 06:13 Uhr
> Von: "Sungbo Eo" <mans0n@xxxxxxxxxx>
> An: linux-mediatek@xxxxxxxxxxxxxxxxxxx
> Cc: "Chunfeng Yun" <chunfeng.yun@xxxxxxxxxxxx>, "Greg Kroah-Hartman" <gregkh@xxxxxxxxxxxxxxxxxxx>, "Rob Herring" <robh+dt@xxxxxxxxxx>, "Matthias Brugger" <matthias.bgg@xxxxxxxxx>, "Min Guo" <min.guo@xxxxxxxxxxxx>, "Frank Wunderlich" <frank-w@xxxxxxxxxxxxxxx>, devicetree@xxxxxxxxxxxxxxx, linux-usb@xxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, "Sungbo Eo" <mans0n@xxxxxxxxxx>
> Betreff: [PATCH v3 1/1] arm: dts: mt7623: add musb device nodes
>
> MT7623 has an musb controller that is compatible with the one from MT2701.
>
> Signed-off-by: Sungbo Eo <mans0n@xxxxxxxxxx>
> ---
> v3:
> * remove unnecessary status=okay from u2port2
>
> v2:
> * rename usb3 label to usb0
> * move usb0 & u2phy1 nodes to the right sorted place
> * disable u2phy1 by default
> * correct u2port2 node name to match its reg address
> ---
>  arch/arm/boot/dts/mt7623.dtsi  | 33 +++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/mt7623a.dtsi |  4 ++++
>  2 files changed, 37 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 3c11f7cfcc40..21c8a291b74e 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -585,6 +585,39 @@ spi2: spi@11017000 {
>  		status = "disabled";
>  	};
>
> +	usb0: usb@11200000 {
> +		compatible = "mediatek,mt7623-musb",
> +			     "mediatek,mtk-musb";
> +		reg = <0 0x11200000 0 0x1000>;
> +		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "mc";
> +		phys = <&u2port2 PHY_TYPE_USB2>;
> +		dr_mode = "otg";
> +		clocks = <&pericfg CLK_PERI_USB0>,
> +			 <&pericfg CLK_PERI_USB0_MCU>,
> +			 <&pericfg CLK_PERI_USB_SLV>;
> +		clock-names = "main","mcu","univpll";
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
> +		status = "disabled";
> +	};
> +
> +	u2phy1: t-phy@11210000 {
> +		compatible = "mediatek,mt7623-tphy",
> +			     "mediatek,generic-tphy-v1";
> +		reg = <0 0x11210000 0 0x0800>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		status = "disabled";
> +
> +		u2port2: usb-phy@11210800 {
> +			reg = <0 0x11210800 0 0x0100>;
> +			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
> +			clock-names = "ref";
> +			#phy-cells = <1>;
> +		};
> +	};
> +
>  	audsys: clock-controller@11220000 {
>  		compatible = "mediatek,mt7623-audsys",
>  			     "mediatek,mt2701-audsys",
> diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
> index 0735a1fb8ad9..d304b62d24b5 100644
> --- a/arch/arm/boot/dts/mt7623a.dtsi
> +++ b/arch/arm/boot/dts/mt7623a.dtsi
> @@ -35,6 +35,10 @@ &scpsys {
>  	clock-names = "ethif";
>  };
>
> +&usb0 {
> +	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
> +};
> +
>  &usb1 {
>  	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
>  };
> --
> 2.33.0
>
>




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux