On Thu, 2021-08-26 at 19:54 +0800, Ikjoon Jang wrote:
> Hi Chunfeng,
>
> On Thu, Aug 26, 2021 at 10:52 AM Chunfeng Yun <
> chunfeng.yun@xxxxxxxxxxxx> wrote:
> >
> > Use @bw_budget_table[] to update fs bus bandwidth due to
> > not all microframes consume @bw_cost_per_microframe, see
> > setup_sch_info().
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> > ---
> > v2: new patch, move from another series
> > ---
> > drivers/usb/host/xhci-mtk-sch.c | 17 +++++++----------
> > 1 file changed, 7 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/usb/host/xhci-mtk-sch.c
> > b/drivers/usb/host/xhci-mtk-sch.c
> > index cffcaf4dfa9f..83abd28269ca 100644
> > --- a/drivers/usb/host/xhci-mtk-sch.c
> > +++ b/drivers/usb/host/xhci-mtk-sch.c
> > @@ -458,8 +458,8 @@ static int check_fs_bus_bw(struct
> > mu3h_sch_ep_info *sch_ep, int offset)
> > * Compared with hs bus, no matter what ep type,
> > * the hub will always delay one uframe to send
> > data
> > */
> > - for (j = 0; j < sch_ep->cs_count; j++) {
> > - tmp = tt->fs_bus_bw[base + j] + sch_ep-
> > >bw_cost_per_microframe;
> > + for (j = 0; j < sch_ep->num_budget_microframes;
> > j++) {
> > + tmp = tt->fs_bus_bw[base + j] + sch_ep-
> > >bw_budget_table[j];
>
> I'm worrying about this case with two endpoints,
> * EP1OUT: isochronous, maxpacket=192: bw_budget_table[] = { 188, 188,
> 0, ... }
> * EP2IN: interrupt, maxpacket=64: bw_budget_table[] = { 0, 0, 64, 64,
> ... }
> (Is this correct bw_budget_table contents for those eps?)
Yes, ep1out isoc use two uframe, ep2in intr use a extra cs;
>
> I'm not sure if it's okay for those two endpoints to be allocated
> on the same u-frame slot.
> Can you please check if this is okay for xhci-mtk?
Already test it this afternoon, can transfer data rightly on our dvt
env.
> (I feel like I already asked the same questions many times.)
Yes, as said before, prefer to use bw_budget_table[], if there is
issue, we can fix it by building this table.
Thanks
>
>
> > if (tmp > FS_PAYLOAD_MAX)
> > return -ESCH_BW_OVERFLOW;
> > }
> > @@ -534,21 +534,18 @@ static void update_sch_tt(struct
> > mu3h_sch_ep_info *sch_ep, bool used)
> > {
> > struct mu3h_sch_tt *tt = sch_ep->sch_tt;
> > u32 base, num_esit;
> > - int bw_updated;
> > int i, j;
> >
> > num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit;
> >
> > - if (used)
> > - bw_updated = sch_ep->bw_cost_per_microframe;
> > - else
> > - bw_updated = -sch_ep->bw_cost_per_microframe;
> > -
> > for (i = 0; i < num_esit; i++) {
> > base = sch_ep->offset + i * sch_ep->esit;
> >
> > - for (j = 0; j < sch_ep->cs_count; j++)
> > - tt->fs_bus_bw[base + j] += bw_updated;
> > + for (j = 0; j < sch_ep->num_budget_microframes;
> > j++)
> > + if (used)
> > + tt->fs_bus_bw[base + j] += sch_ep-
> > >bw_budget_table[j];
> > + else
> > + tt->fs_bus_bw[base + j] -= sch_ep-
> > >bw_budget_table[j];
> > }
> >
> > if (used)
> > --
> > 2.18.0
> >
