Re: [PATCH v5 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-08-12 11:41, Manivannan Sadhasivam wrote:
On Tue, Aug 10, 2021 at 09:38:36AM +0530, Prasad Malisetty wrote:
On the SC7280, By default the clock source for pcie_1_pipe is
TCXO for gdsc enable. But after the PHY is initialized, the clock
source must be switched to gcc_pcie_1_pipe_clk from TCXO.

Signed-off-by: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 8a7a300..39e3b21 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -166,6 +166,8 @@ struct qcom_pcie_resources_2_7_0 {
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
 	struct clk *pipe_clk;
+	struct clk *gcc_pcie_1_pipe_clk_src;
+	struct clk *phy_pipe_clk;
 };

 union qcom_pcie_resources {
@@ -1167,6 +1169,16 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	if (ret < 0)
 		return ret;

+	if (of_device_is_compatible(dev->of_node, "qcom,pcie-sc7280")) {
+		res->gcc_pcie_1_pipe_clk_src = devm_clk_get(dev, "pipe_mux");
+		if (IS_ERR(res->gcc_pcie_1_pipe_clk_src))
+			return PTR_ERR(res->gcc_pcie_1_pipe_clk_src);
+
+		res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
+		if (IS_ERR(res->phy_pipe_clk))
+			return PTR_ERR(res->phy_pipe_clk);
+	}
+
 	res->pipe_clk = devm_clk_get(dev, "pipe");
 	return PTR_ERR_OR_ZERO(res->pipe_clk);
 }
@@ -1255,6 +1267,12 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *node = dev->of_node;
+
+	if (of_property_read_bool(node, "pipe-clk-source-switch"))

Wondering why you didn't use the compatible here as well. This will break if the
property exist but the clocks are not.

Thanks,
Mani


Hi Mani,

In earlier versions we used compatible method here as well, but in v5 replaced compatible with new boolean flag.

In recent comments as Stephen suggested, its straight forward approach. if src pointer is NULL, clk_set_parent return 0 and nop I will remove both compatible and property read approach and update the change in next version.


+		clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->phy_pipe_clk);

 	return clk_prepare_enable(res->pipe_clk);
 }
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux