Hello!
On 12.08.2021 4:08, Slark Xiao wrote:
HI Sergei,
Yes. Our produt has 3 mode: PCIe mode only, USB mode only, and PCIE+USB.
When we need to reproduce some crash issue, we will let it enter into
PCIE+USB mode.
In this scenario, USB would have a diag port to capture memory dump.
That's all fine, I was just pointing out the typo. :-)
Couldn't open your another reply...
At 2021-08-11 18:58:09, "Sergei Shtylyov" <sergei.shtylyov@xxxxxxxxx> wrote:
Hello!
On 11.08.2021 11:56, Slark Xiao wrote:
Foxconn SDX55 T77W175 device is working in PCIe mode normally.
You can find it in drivers/bus/mhi/pci_geneirc.c file.
pci_generic? :-)
But in some scenario, we need to capture the memory dump once it crashed.
So a diag port driver is needed.
Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx>
[...]
MBR, Sergei
