At 2021-08-11 20:01:57, "Bjørn Mork" <bjorn@xxxxxxx> wrote:
>Slark Xiao <slark_xiao@xxxxxxx> writes:
>
>> diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
>> index 83da8236e3c8..d8b58aea3c60 100644
>> --- a/drivers/usb/serial/qcserial.c
>> +++ b/drivers/usb/serial/qcserial.c
>> @@ -111,6 +111,7 @@ static const struct usb_device_id id_table[] = {
>> {USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
>> {USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */
>> {USB_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
>> + {USB_DEVICE(0x05c6, 0x901d)}, /* Foxconn SDX55 QDL */
>
>I assume this device will expose other serial functions when booted in
>application USB mode? But probably not with a Gobi 2k layout... Maybe
>add the application device ID to some USB serial driver too, and include
>the QDL device ID there as well to reduce confusion?
>
>Could you provide a view of the default USB descriptors in both QDL and
>application mode? E.g from lsusb -v or /sys/kernel/debug/usb/devices?
>
>
>Bjørn
Hi Bjørn,
Thank you for your good advice. Actually it's my typo for 'QDL'. It should be 'Diag' port.
Please see my local setting for PCIE+USB mode:
jbd@jbd-ThinkPad-P1-Gen-4:~/git/net-next$ lsusb | grep 05c6
Bus 003 Device 003: ID 05c6:901d Qualcomm, Inc. Qualcomm HS-USB Android Diag 901D
jbd@jbd-ThinkPad-P1-Gen-4:~$ lspci | grep Foxconn
0000:08:00.0 Wireless controller [0d40]: Foxconn International, Inc. Device e0ab
One more, should I add a new layout for Qualcomm SDX55 platform? As there are G1K,G2K, SIERRA and HUAWEI layout, none of them includes Qualcomm SDX55.
Thanks
