Re: [PATCH v6 09/12] power: supply: smb347-charger: Implement USB VBUS regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Sat, Jul 31, 2021 at 08:38:39PM +0300, Dmitry Osipenko wrote:
> SMB347 can supply power to USB VBUS, implement the USB VBUS regulator.
> USB VBUS needs to be powered for switching OTG-cable USB port into host
> mode.
> 
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>

-- Sebastian

>  drivers/power/supply/Kconfig          |   1 +
>  drivers/power/supply/smb347-charger.c | 219 ++++++++++++++++++++++++++
>  2 files changed, 220 insertions(+)
> 
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 8543c89a0c1a..e83e9e4d512c 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -694,6 +694,7 @@ config CHARGER_BQ256XX
>  config CHARGER_SMB347
>  	tristate "Summit Microelectronics SMB3XX Battery Charger"
>  	depends on I2C
> +	depends on REGULATOR
>  	select REGMAP_I2C
>  	help
>  	  Say Y to include support for Summit Microelectronics SMB345,
> diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
> index 1c9205ca0993..753944e774c4 100644
> --- a/drivers/power/supply/smb347-charger.c
> +++ b/drivers/power/supply/smb347-charger.c
> @@ -18,6 +18,7 @@
>  #include <linux/power_supply.h>
>  #include <linux/property.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
>  
>  #include <dt-bindings/power/summit,smb347-charger.h>
>  
> @@ -63,12 +64,15 @@
>  #define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT	2
>  #define CFG_THERM_MONITOR_DISABLED		BIT(4)
>  #define CFG_SYSOK				0x08
> +#define CFG_SYSOK_INOK_ACTIVE_HIGH		BIT(0)
>  #define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED	BIT(2)
>  #define CFG_OTHER				0x09
>  #define CFG_OTHER_RID_MASK			0xc0
>  #define CFG_OTHER_RID_ENABLED_AUTO_OTG		0xc0
>  #define CFG_OTG					0x0a
>  #define CFG_OTG_TEMP_THRESHOLD_MASK		0x30
> +#define CFG_OTG_CURRENT_LIMIT_250mA		BIT(2)
> +#define CFG_OTG_CURRENT_LIMIT_750mA		BIT(3)
>  #define CFG_OTG_TEMP_THRESHOLD_SHIFT		4
>  #define CFG_OTG_CC_COMPENSATION_MASK		0xc0
>  #define CFG_OTG_CC_COMPENSATION_SHIFT		6
> @@ -92,6 +96,7 @@
>  #define CMD_A					0x30
>  #define CMD_A_CHG_ENABLED			BIT(1)
>  #define CMD_A_SUSPEND_ENABLED			BIT(2)
> +#define CMD_A_OTG_ENABLED			BIT(4)
>  #define CMD_A_ALLOW_WRITE			BIT(7)
>  #define CMD_B					0x31
>  #define CMD_C					0x33
> @@ -133,10 +138,12 @@
>   * @regmap: pointer to driver regmap
>   * @mains: power_supply instance for AC/DC power
>   * @usb: power_supply instance for USB power
> + * @usb_rdev: USB VBUS regulator device
>   * @id: SMB charger ID
>   * @mains_online: is AC/DC input connected
>   * @usb_online: is USB input connected
>   * @irq_unsupported: is interrupt unsupported by SMB hardware
> + * @usb_vbus_enabled: is USB VBUS powered by SMB charger
>   * @max_charge_current: maximum current (in uA) the battery can be charged
>   * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
>   * @pre_charge_current: current (in uA) to use in pre-charging phase
> @@ -167,6 +174,8 @@
>   * @use_usb_otg: USB OTG output can be used (not implemented yet)
>   * @enable_control: how charging enable/disable is controlled
>   *		    (driver/pin controls)
> + * @inok_polarity: polarity of INOK signal which denotes presence of external
> + *		   power supply
>   *
>   * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
>   * hardware support for these. This is useful when we want to have for
> @@ -189,10 +198,12 @@ struct smb347_charger {
>  	struct regmap		*regmap;
>  	struct power_supply	*mains;
>  	struct power_supply	*usb;
> +	struct regulator_dev	*usb_rdev;
>  	unsigned int		id;
>  	bool			mains_online;
>  	bool			usb_online;
>  	bool			irq_unsupported;
> +	bool			usb_vbus_enabled;
>  
>  	unsigned int		max_charge_current;
>  	unsigned int		max_charge_voltage;
> @@ -213,6 +224,7 @@ struct smb347_charger {
>  	bool			use_usb;
>  	bool			use_usb_otg;
>  	unsigned int		enable_control;
> +	unsigned int		inok_polarity;
>  };
>  
>  enum smb_charger_chipid {
> @@ -362,6 +374,11 @@ static int smb347_charging_set(struct smb347_charger *smb, bool enable)
>  		return 0;
>  	}
>  
> +	if (enable && smb->usb_vbus_enabled) {
> +		dev_dbg(smb->dev, "charging not enabled because USB is in host mode\n");
> +		return 0;
> +	}
> +
>  	return regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
>  				  enable ? CMD_A_CHG_ENABLED : 0);
>  }
> @@ -1253,6 +1270,13 @@ static void smb347_dt_parse_dev_info(struct smb347_charger *smb)
>  	/* Select charging control */
>  	device_property_read_u32(dev, "summit,enable-charge-control",
>  				 &smb->enable_control);
> +
> +	/*
> +	 * Polarity of INOK signal indicating presence of external power
> +	 * supply connected to the charger.
> +	 */
> +	device_property_read_u32(dev, "summit,inok-polarity",
> +				 &smb->inok_polarity);
>  }
>  
>  static int smb347_get_battery_info(struct smb347_charger *smb)
> @@ -1304,6 +1328,160 @@ static int smb347_get_battery_info(struct smb347_charger *smb)
>  	return 0;
>  }
>  
> +static int smb347_usb_vbus_get_current_limit(struct regulator_dev *rdev)
> +{
> +	struct smb347_charger *smb = rdev_get_drvdata(rdev);
> +	unsigned int val;
> +	int ret;
> +
> +	ret = regmap_read(smb->regmap, CFG_OTG, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	/*
> +	 * It's unknown what happens if this bit is unset due to lack of
> +	 * access to the datasheet, assume it's limit-enable.
> +	 */
> +	if (!(val & CFG_OTG_CURRENT_LIMIT_250mA))
> +		return 0;
> +
> +	return val & CFG_OTG_CURRENT_LIMIT_750mA ? 750000 : 250000;
> +}
> +
> +static int smb347_usb_vbus_set_new_current_limit(struct smb347_charger *smb,
> +						 int max_uA)
> +{
> +	const unsigned int mask = CFG_OTG_CURRENT_LIMIT_750mA |
> +				  CFG_OTG_CURRENT_LIMIT_250mA;
> +	unsigned int val = CFG_OTG_CURRENT_LIMIT_250mA;
> +	int ret;
> +
> +	if (max_uA >= 750000)
> +		val |= CFG_OTG_CURRENT_LIMIT_750mA;
> +
> +	ret = regmap_update_bits(smb->regmap, CFG_OTG, mask, val);
> +	if (ret < 0)
> +		dev_err(smb->dev, "failed to change USB current limit\n");
> +
> +	return ret;
> +}
> +
> +static int smb347_usb_vbus_set_current_limit(struct regulator_dev *rdev,
> +					     int min_uA, int max_uA)
> +{
> +	struct smb347_charger *smb = rdev_get_drvdata(rdev);
> +	int ret;
> +
> +	ret = smb347_set_writable(smb, true, true);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA);
> +	smb347_set_writable(smb, false, true);
> +
> +	return ret;
> +}
> +
> +static int smb347_usb_vbus_regulator_enable(struct regulator_dev *rdev)
> +{
> +	struct smb347_charger *smb = rdev_get_drvdata(rdev);
> +	int ret, max_uA;
> +
> +	ret = smb347_set_writable(smb, true, true);
> +	if (ret < 0)
> +		return ret;
> +
> +	smb347_charging_disable(smb);
> +
> +	if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) {
> +		unsigned int sysok = 0;
> +
> +		if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_LOW)
> +			sysok = CFG_SYSOK_INOK_ACTIVE_HIGH;
> +
> +		/*
> +		 * VBUS won't be powered if INOK is active, so we need to
> +		 * manually disable INOK on some platforms.
> +		 */
> +		ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
> +					 CFG_SYSOK_INOK_ACTIVE_HIGH, sysok);
> +		if (ret < 0) {
> +			dev_err(smb->dev, "failed to disable INOK\n");
> +			goto done;
> +		}
> +	}
> +
> +	ret = smb347_usb_vbus_get_current_limit(rdev);
> +	if (ret < 0) {
> +		dev_err(smb->dev, "failed to get USB VBUS current limit\n");
> +		goto done;
> +	}
> +
> +	max_uA = ret;
> +
> +	ret = smb347_usb_vbus_set_new_current_limit(smb, 250000);
> +	if (ret < 0) {
> +		dev_err(smb->dev, "failed to preset USB VBUS current limit\n");
> +		goto done;
> +	}
> +
> +	ret = regmap_set_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED);
> +	if (ret < 0) {
> +		dev_err(smb->dev, "failed to enable USB VBUS\n");
> +		goto done;
> +	}
> +
> +	smb->usb_vbus_enabled = true;
> +
> +	ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA);
> +	if (ret < 0) {
> +		dev_err(smb->dev, "failed to restore USB VBUS current limit\n");
> +		goto done;
> +	}
> +done:
> +	smb347_set_writable(smb, false, true);
> +
> +	return ret;
> +}
> +
> +static int smb347_usb_vbus_regulator_disable(struct regulator_dev *rdev)
> +{
> +	struct smb347_charger *smb = rdev_get_drvdata(rdev);
> +	int ret;
> +
> +	ret = smb347_set_writable(smb, true, true);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_clear_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED);
> +	if (ret < 0) {
> +		dev_err(smb->dev, "failed to disable USB VBUS\n");
> +		goto done;
> +	}
> +
> +	smb->usb_vbus_enabled = false;
> +
> +	if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) {
> +		unsigned int sysok = 0;
> +
> +		if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_HIGH)
> +			sysok = CFG_SYSOK_INOK_ACTIVE_HIGH;
> +
> +		ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
> +					 CFG_SYSOK_INOK_ACTIVE_HIGH, sysok);
> +		if (ret < 0) {
> +			dev_err(smb->dev, "failed to enable INOK\n");
> +			goto done;
> +		}
> +	}
> +
> +	smb347_start_stop_charging(smb);
> +done:
> +	smb347_set_writable(smb, false, true);
> +
> +	return ret;
> +}
> +
>  static const struct regmap_config smb347_regmap = {
>  	.reg_bits	= 8,
>  	.val_bits	= 8,
> @@ -1314,6 +1492,14 @@ static const struct regmap_config smb347_regmap = {
>  	.num_reg_defaults_raw = SMB347_MAX_REGISTER,
>  };
>  
> +static const struct regulator_ops smb347_usb_vbus_regulator_ops = {
> +	.is_enabled	= regulator_is_enabled_regmap,
> +	.enable		= smb347_usb_vbus_regulator_enable,
> +	.disable	= smb347_usb_vbus_regulator_disable,
> +	.get_current_limit = smb347_usb_vbus_get_current_limit,
> +	.set_current_limit = smb347_usb_vbus_set_current_limit,
> +};
> +
>  static const struct power_supply_desc smb347_mains_desc = {
>  	.name		= "smb347-mains",
>  	.type		= POWER_SUPPLY_TYPE_MAINS,
> @@ -1330,10 +1516,24 @@ static const struct power_supply_desc smb347_usb_desc = {
>  	.num_properties	= ARRAY_SIZE(smb347_properties),
>  };
>  
> +static const struct regulator_desc smb347_usb_vbus_regulator_desc = {
> +	.name		= "smb347-usb-vbus",
> +	.of_match	= of_match_ptr("usb-vbus"),
> +	.ops		= &smb347_usb_vbus_regulator_ops,
> +	.type		= REGULATOR_VOLTAGE,
> +	.owner		= THIS_MODULE,
> +	.enable_reg	= CMD_A,
> +	.enable_mask	= CMD_A_OTG_ENABLED,
> +	.enable_val	= CMD_A_OTG_ENABLED,
> +	.fixed_uV	= 5000000,
> +	.n_voltages	= 1,
> +};
> +
>  static int smb347_probe(struct i2c_client *client,
>  			const struct i2c_device_id *id)
>  {
>  	struct power_supply_config mains_usb_cfg = {};
> +	struct regulator_config usb_rdev_cfg = {};
>  	struct device *dev = &client->dev;
>  	struct smb347_charger *smb;
>  	int ret;
> @@ -1381,6 +1581,18 @@ static int smb347_probe(struct i2c_client *client,
>  	if (ret)
>  		return ret;
>  
> +	usb_rdev_cfg.dev = dev;
> +	usb_rdev_cfg.driver_data = smb;
> +	usb_rdev_cfg.regmap = smb->regmap;
> +
> +	smb->usb_rdev = devm_regulator_register(dev,
> +						&smb347_usb_vbus_regulator_desc,
> +						&usb_rdev_cfg);
> +	if (IS_ERR(smb->usb_rdev)) {
> +		smb347_irq_disable(smb);
> +		return PTR_ERR(smb->usb_rdev);
> +	}
> +
>  	return 0;
>  }
>  
> @@ -1388,11 +1600,17 @@ static int smb347_remove(struct i2c_client *client)
>  {
>  	struct smb347_charger *smb = i2c_get_clientdata(client);
>  
> +	smb347_usb_vbus_regulator_disable(smb->usb_rdev);
>  	smb347_irq_disable(smb);
>  
>  	return 0;
>  }
>  
> +static void smb347_shutdown(struct i2c_client *client)
> +{
> +	smb347_remove(client);
> +}
> +
>  static const struct i2c_device_id smb347_id[] = {
>  	{ "smb345", SMB345 },
>  	{ "smb347", SMB347 },
> @@ -1416,6 +1634,7 @@ static struct i2c_driver smb347_driver = {
>  	},
>  	.probe = smb347_probe,
>  	.remove = smb347_remove,
> +	.shutdown = smb347_shutdown,
>  	.id_table = smb347_id,
>  };
>  module_i2c_driver(smb347_driver);
> -- 
> 2.32.0
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux