Currently phy_device state could be left in inconsistent state shown
by following alert message[1]. This is because phy_read_status could
be called concurrently from lan78xx_delayedwork, phy_state_machine and
__ethtool_get_link. Fix this by making sure that phy_device state is
updated atomically.
[1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1)
Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxx>
---
drivers/net/usb/lan78xx.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index b27229d34425..0c964d0bd2d6 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1154,7 +1154,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
{
struct phy_device *phydev = dev->net->phydev;
struct ethtool_link_ksettings ecmd;
- int ladv, radv, ret;
+ int ladv, radv, ret, link;
u32 buf;
/* clear LAN78xx interrupt status */
@@ -1162,9 +1162,12 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
if (unlikely(ret < 0))
return -EIO;
+ mutex_lock(&phydev->lock);
phy_read_status(phydev);
+ link = phydev->link;
+ mutex_unlock(&phydev->lock);
- if (!phydev->link && dev->link_on) {
+ if (!link && dev->link_on) {
dev->link_on = false;
/* reset MAC */
@@ -1177,7 +1180,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
return -EIO;
del_timer(&dev->stat_monitor);
- } else if (phydev->link && !dev->link_on) {
+ } else if (link && !dev->link_on) {
dev->link_on = true;
phy_ethtool_ksettings_get(phydev, &ecmd);
@@ -1464,9 +1467,14 @@ static int lan78xx_set_eee(struct net_device *net, struct ethtool_eee *edata)
static u32 lan78xx_get_link(struct net_device *net)
{
+ u32 link;
+
+ mutex_lock(&net->phydev->lock);
phy_read_status(net->phydev);
+ link = net->phydev->link;
+ mutex_unlock(&net->phydev->lock);
- return net->phydev->link;
+ return link;
}
static void lan78xx_get_drvinfo(struct net_device *net,
--
2.32.0
