Hi Chunfeng, On Fri, Jul 30, 2021 at 4:51 PM Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> wrote: > > Use @bw_budget_table[] to update fs bus bandwidth due to > not all microframes consume @bw_cost_per_microframe, see > setup_sch_info(). > > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > --- > drivers/usb/host/xhci-mtk-sch.c | 17 +++++++---------- > 1 file changed, 7 insertions(+), 10 deletions(-) > > diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c > index 0bb1a6295d64..10c0f0f6461f 100644 > --- a/drivers/usb/host/xhci-mtk-sch.c > +++ b/drivers/usb/host/xhci-mtk-sch.c > @@ -458,8 +458,8 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) > * Compared with hs bus, no matter what ep type, > * the hub will always delay one uframe to send data > */ > - for (j = 0; j < sch_ep->cs_count; j++) { > - tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_cost_per_microframe; > + for (j = 0; j < sch_ep->num_budget_microframes; j++) { > + tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_budget_table[j]; > if (tmp > FS_PAYLOAD_MAX) > return -ESCH_BW_OVERFLOW; > } > @@ -534,21 +534,18 @@ static void update_sch_tt(struct mu3h_sch_ep_info *sch_ep, bool used) > { > struct mu3h_sch_tt *tt = sch_ep->sch_tt; > u32 base, num_esit; > - int bw_updated; > int i, j; > > num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; > > - if (used) > - bw_updated = sch_ep->bw_cost_per_microframe; > - else > - bw_updated = -sch_ep->bw_cost_per_microframe; > - > for (i = 0; i < num_esit; i++) { > base = sch_ep->offset + i * sch_ep->esit; > > - for (j = 0; j < sch_ep->cs_count; j++) > - tt->fs_bus_bw[base + j] += bw_updated; > + for (j = 0; j < sch_ep->num_budget_microframes; j++) > + if (used) > + tt->fs_bus_bw[base + j] += sch_ep->bw_budget_table[j]; > + else > + tt->fs_bus_bw[base + j] -= sch_ep->bw_budget_table[j]; I agree that xhci-mtk-sch still has more rooms for tt periodic bandwidth but I think this approach could trigger a problem. for example, if there are two endpoints scheduled in the same u-frame index, * ep1out = iso 192bytes bw_budget_table[] = { 188, 188, 0, ...} --> y0 * ep2in = int 64bytes, bw_budget_table[] = { 0, 0, 64, ... } --> y0 (If this is possible allocation from this patch), I guess xhci-mtk could have some problems on internal scheduling? > } > > if (used) > -- > 2.18.0 >