On Tue, 2021-07-27 at 18:50 +0800, Macpaul Lin wrote:
> Some embedded platform shared PINs between USB and UART.
> For example, some phone will use special cable detection in boot loader
> to switch USB port function into UART mode.
>
> This patch support USB2UART switch function in phy-mtk-tphy.
> 1. Implement USB2UART switch API support in phy-mtk-tphy.
> 2. Use PHY_MODE_UART support according to new mode in phy.h.
> 3. Use mtk_phy_get_mode_ext() to query the current MODE from hardware.
>
> Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
> ---
> drivers/phy/mediatek/phy-mtk-tphy.c | 114 +++++++++++++++++++++++++++++++++++
> 1 file changed, 114 insertions(+)
>
title: please use "phy: phy-mtk-tphy: ..." as other patches
> diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
> index cdbcc49..a7dfeec 100644
> --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> @@ -68,6 +68,7 @@
> #define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
>
> #define U3P_U2PHYACR4 0x020
> +#define P2C_RG_USB20_DM_100K_EN BIT(17)
> #define P2C_RG_USB20_GPIO_CTL BIT(9)
> #define P2C_USB20_GPIO_MODE BIT(8)
> #define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
> @@ -76,6 +77,12 @@
> #define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
>
> #define U3P_U2PHYDTM0 0x068
> +#define P2C_RG_UART_MODE GENMASK(31, 30)
> +#define P2C_RG_UART_MODE_VAL(x) ((0x3 & (x)) << 30)
> +#define P2C_RG_UART_MODE_OFET (30)
> +#define P2C_FORCE_UART_I BIT(29)
> +#define P2C_FORCE_UART_BIAS_EN BIT(28)
> +#define P2C_FORCE_UART_TX_OE BIT(27)
> #define P2C_FORCE_UART_EN BIT(26)
> #define P2C_FORCE_DATAIN BIT(23)
> #define P2C_FORCE_DM_PULLDOWN BIT(21)
> @@ -98,6 +105,8 @@
> P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
>
> #define U3P_U2PHYDTM1 0x06C
> +#define P2C_RG_UART_BIAS_EN BIT(18)
> +#define P2C_RG_UART_TX_OE BIT(17)
> #define P2C_RG_UART_EN BIT(16)
> #define P2C_FORCE_IDDIG BIT(9)
> #define P2C_RG_VBUSVALID BIT(5)
> @@ -600,6 +609,90 @@ static void u2_phy_instance_exit(struct mtk_tphy *tphy,
> }
> }
>
> +static void u2_phy_instance_set_mode_2uart(struct u2phy_banks *u2_banks)
> +{
> + u32 tmp;
> +
> + /* Clear PA6_RG_U2_BC11_SW_EN */
remove the comments
> + tmp = readl(u2_banks->com + U3P_USBPHYACR6);
> + tmp &= ~(PA6_RG_U2_BC11_SW_EN);
> + writel(tmp, u2_banks->com + U3P_USBPHYACR6);
> +
> + /* Set P2C_RG_SUSPENDM */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_RG_SUSPENDM;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_FORCE_SUSPENDM */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_FORCE_SUSPENDM;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Clear and Set P2C_RG_UART_MODE to 2'b01 */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp &= ~(P2C_RG_UART_MODE);
> + tmp |= P2C_RG_UART_MODE_VAL(0x1);
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Clear P2C_FORCE_UART_I */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp &= ~(P2C_FORCE_UART_I);
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_FORCE_UART_BIAS_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_FORCE_UART_BIAS_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_FORCE_UART_TX_OE */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_FORCE_UART_TX_OE;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_FORCE_UART_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_FORCE_UART_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_RG_UART_BIAS_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_RG_UART_BIAS_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_RG_UART_TX_OE */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_RG_UART_TX_OE;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_RG_UART_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_RG_UART_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_RG_USB20_DM_100K_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYACR4);
> + tmp |= P2C_RG_USB20_DM_100K_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYACR4);
> +
> + /* Clear P2C_RG_DMPULLDOWN, P2C_RG_DPPULLDOWN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp &= ~(P2C_RG_DPPULLDOWN | P2C_RG_DMPULLDOWN);
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +}
> +
> +static int u2_phy_instance_get_mode_ext(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
> +{
> + struct u2phy_banks *u2_banks = &instance->u2_banks;
> + u32 tmp;
> +
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +
> + if ((tmp & P2C_RG_UART_MODE) >> P2C_RG_UART_MODE_OFET)
> + return PHY_MODE_UART;
> + else
> + return PHY_MODE_USB_OTG;
> +}
> +
> static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
> struct mtk_phy_instance *instance,
> enum phy_mode mode)
> @@ -609,6 +702,9 @@ static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
>
> tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
> switch (mode) {
> + case PHY_MODE_UART:
> + u2_phy_instance_set_mode_2uart(u2_banks);
How do you use this helper?
Can we switch back to usb phy mode if switching to uart?
When switch to uart mode, if the host supports multi-ports, it will
cause the host can't enter sleep mode anymore.
> + return;
> case PHY_MODE_USB_DEVICE:
> tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
> break;
> @@ -933,6 +1029,10 @@ static int mtk_phy_init(struct phy *phy)
> return ret;
> }
>
> + ret = u2_phy_instance_get_mode_ext(tphy, instance);
> + if (ret == PHY_MODE_UART)
> + return 0;
> +
> switch (instance->type) {
> case PHY_TYPE_USB2:
> u2_phy_instance_init(tphy, instance);
> @@ -996,6 +1096,19 @@ static int mtk_phy_exit(struct phy *phy)
> return 0;
> }
>
> +static int mtk_phy_get_mode_ext(struct phy *phy)
> +{
> + struct mtk_phy_instance *instance = phy_get_drvdata(phy);
> + struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
> + int ret;
> +
> + ret = 0;
> + if (instance->type == PHY_TYPE_USB2)
> + ret = u2_phy_instance_get_mode_ext(tphy, instance);
> +
> + return ret;
> +}
> +
> static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> {
> struct mtk_phy_instance *instance = phy_get_drvdata(phy);
> @@ -1060,6 +1173,7 @@ static struct phy *mtk_phy_xlate(struct device *dev,
> .power_on = mtk_phy_power_on,
> .power_off = mtk_phy_power_off,
> .set_mode = mtk_phy_set_mode,
> + .get_mode_ext = mtk_phy_get_mode_ext,
> .owner = THIS_MODULE,
> };
>
