Re: [PATCH v2 1/2] dt-bindings: connector: Add pd-supported property

[Guenter Roeck <linux@xxxxxxxxxxxx>]

On 7/27/21 8:13 AM, Kyle Tso wrote:
> Set pd-supported property if the Type-C connector has power delivery
> support.
>
> Signed-off-by: Kyle Tso <kyletso@xxxxxxxxxx>
> ---
>   .../devicetree/bindings/connector/usb-connector.yaml         | 5 +++++
>   1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> index 92b49bc37939..8ed271feea08 100644
> --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> @@ -111,6 +111,10 @@ properties:
>         - 1.5A
>         - 3.0A
>   
> +  pd-supported:

I think that would have to be a property indicating that pd is _not_
supported, for compatibility reasons. Otherwise all existing bindings
would indicate that pd is not supported.

> +    description: Set this property if the Type-C connector has power delivery support.
> +    type: boolean
> +
>     # The following are optional properties for "usb-c-connector" with power
>     # delivery support.
>     source-pdos:
> @@ -312,6 +316,7 @@ examples:
>           label = "USB-C";
>           power-role = "dual";
>           try-power-role = "sink";
> +        pd-supported;
>           source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
>           sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
>                        PDO_VAR(5000, 12000, 2000)>;