On SAMA7G5 suspending ports will cut the access to OHCI registers and any subsequent access to them will lead to CPU being blocked trying to access that memory. Same thing happens on resume: if OHCI memory is accessed before resuming ports the CPU will block on that access. The OCHI memory is accessed on suspend/resume though ohci_suspend()/ohci_resume(). Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> --- Changes in v2: - rebase on top of v5.14-rc2 - collected tag drivers/usb/host/ohci-at91.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 9bbd7ddd0003..a24aea3d2759 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -611,8 +611,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev) if (ohci_at91->wakeup) enable_irq_wake(hcd->irq); - ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); - ret = ohci_suspend(hcd, ohci_at91->wakeup); if (ret) { if (ohci_at91->wakeup) @@ -632,7 +630,10 @@ ohci_hcd_at91_drv_suspend(struct device *dev) /* flush the writes */ (void) ohci_readl (ohci, &ohci->regs->control); msleep(1); + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); at91_stop_clock(ohci_at91); + } else { + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); } return ret; @@ -644,6 +645,8 @@ ohci_hcd_at91_drv_resume(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); + if (ohci_at91->wakeup) disable_irq_wake(hcd->irq); else @@ -651,8 +654,6 @@ ohci_hcd_at91_drv_resume(struct device *dev) ohci_resume(hcd, false); - ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); - return 0; } -- 2.25.1