[PATCH] A reset can be sent anytime and so the vhcd Root Hub should renable the port always on a virtual reset

[Michael Broadfoot <msbroadf@xxxxxxxxx>]

And if the HIGH and LOW flags are not set on the port
status that means FULL speed and is not an
error (see 11.24.2.7.1 Port Status Bits)
---
 drivers/usb/usbip/vhci_hcd.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 4ba6bcdaa8e9..3ea76dcdc8e2 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -455,15 +455,12 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET);
 			vhci_hcd->re_timeout = 0;
 
-			if (vhci_hcd->vdev[rhport].ud.status ==
-			    VDEV_ST_NOTASSIGNED) {
 				usbip_dbg_vhci_rh(
 					" enable rhport %d (status %u)\n",
 					rhport,
 					vhci_hcd->vdev[rhport].ud.status);
 				vhci_hcd->port_status[rhport] |=
 					USB_PORT_STAT_ENABLE;
-			}
 
 			if (hcd->speed < HCD_USB3) {
 				switch (vhci_hcd->vdev[rhport].speed) {
@@ -475,8 +472,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 					vhci_hcd->port_status[rhport] |=
 						USB_PORT_STAT_LOW_SPEED;
 					break;
-				default:
-					pr_err("vhci_device speed not set\n");
+				default: // FULL speed
 					break;
 				}
 			}
-- 
2.30.2