Regmap already provides us with the caching, so remove caching of charger
state to make code cleaner.
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
drivers/power/supply/smb347-charger.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
index db1378b41f80..f81c60c679a0 100644
--- a/drivers/power/supply/smb347-charger.c
+++ b/drivers/power/supply/smb347-charger.c
@@ -135,7 +135,6 @@
* @id: SMB charger ID
* @mains_online: is AC/DC input connected
* @usb_online: is USB input connected
- * @charging_enabled: is charging enabled
* @irq_unsupported: is interrupt unsupported by SMB hardware
* @max_charge_current: maximum current (in uA) the battery can be charged
* @max_charge_voltage: maximum voltage (in uV) the battery can be charged
@@ -192,7 +191,6 @@ struct smb347_charger {
unsigned int id;
bool mains_online;
bool usb_online;
- bool charging_enabled;
bool irq_unsupported;
unsigned int max_charge_current;
@@ -358,21 +356,13 @@ static int smb347_charging_status(struct smb347_charger *smb)
static int smb347_charging_set(struct smb347_charger *smb, bool enable)
{
- int ret = 0;
-
if (smb->enable_control != SMB3XX_CHG_ENABLE_SW) {
dev_dbg(smb->dev, "charging enable/disable in SW disabled\n");
return 0;
}
- if (smb->charging_enabled != enable) {
- ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
- enable ? CMD_A_CHG_ENABLED : 0);
- if (!ret)
- smb->charging_enabled = enable;
- }
-
- return ret;
+ return regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
+ enable ? CMD_A_CHG_ENABLED : 0);
}
static inline int smb347_charging_enable(struct smb347_charger *smb)
--
2.32.0
