During interrupt registration, attach state is checked. If attached, then
the Type-C state is updated with typec_set_xxx functions and role switch is
set with usb_role_switch_set_role().
If the usb_role_switch parameter is error or null, the function simply
returns 0.
So, to update usb_role_switch role if a device is attached before the irq
is registered, usb_role_switch must be registered before irq registration.
Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
---
drivers/usb/typec/stusb160x.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c
index 6eaeba9b096e..3d3848e7c2c2 100644
--- a/drivers/usb/typec/stusb160x.c
+++ b/drivers/usb/typec/stusb160x.c
@@ -739,10 +739,6 @@ static int stusb160x_probe(struct i2c_client *client)
typec_set_pwr_opmode(chip->port, chip->pwr_opmode);
if (client->irq) {
- ret = stusb160x_irq_init(chip, client->irq);
- if (ret)
- goto port_unregister;
-
chip->role_sw = fwnode_usb_role_switch_get(fwnode);
if (IS_ERR(chip->role_sw)) {
ret = PTR_ERR(chip->role_sw);
@@ -752,6 +748,10 @@ static int stusb160x_probe(struct i2c_client *client)
ret);
goto port_unregister;
}
+
+ ret = stusb160x_irq_init(chip, client->irq);
+ if (ret)
+ goto role_sw_put;
} else {
/*
* If Source or Dual power role, need to enable VDD supply
@@ -775,6 +775,9 @@ static int stusb160x_probe(struct i2c_client *client)
return 0;
+role_sw_put:
+ if (chip->role_sw)
+ usb_role_switch_put(chip->role_sw);
port_unregister:
typec_unregister_port(chip->port);
all_reg_disable:
--
2.25.1
