Re: [PATCH v3 02/12] dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 13, 2021 at 02:33:11AM +0300, Dmitry Osipenko wrote:
> 12.07.2021 18:41, Rob Herring пишет:
> >> +  nvidia,pmc:
> >> +    $ref: /schemas/types.yaml#/definitions/phandle
> >> +    description:
> >> +      Phandle to Power Management controller.
> >> +
> > Add a cell to this for the PHY reg offset and then get rid of the index:
> > 
> >> +  nvidia,phy-instance:
> >> +    $ref: /schemas/types.yaml#/definitions/uint32
> >> +    minimum: 0
> >> +    maximum: 2
> >> +    description: Unique hardware ID.
> 
> The instance ID belongs to the USB h/w and not to PMC. It may look like
> I added the ID just to get offsets within PMC, but it's not like that.
> The Tegra documentation explicitly assigns unique IDs to the USB
> controllers and PHYs. Hence this ID should be the property of the PHY
> hardware, IMO.

It looks like the use is calculating register offsets in a PMC register. 
That's quite common and including that with the phandle is the preferred 
way to describe it.

Lots of docs have UART1, UART2, UART3, etc. module numbering. We don't 
copy that into DT.

Rob




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux