On Tue, Jun 22, 2021 at 04:24:36PM +0200, Thierry Reding wrote: > From: Thierry Reding <treding@xxxxxxxxxx> > > Convert the old plain-text device tree bindings for the USB EHCI > controller found on NVIDIA Tegra SoCs to the json-schema format. > > Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> > --- > Changes in v2: > - drop unneeded clock-names property > - fix indentation issues > > .../bindings/usb/nvidia,tegra20-ehci.txt | 23 --- > .../bindings/usb/nvidia,tegra20-ehci.yaml | 150 ++++++++++++++++++ > 2 files changed, 150 insertions(+), 23 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt > create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.yaml > > diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt > deleted file mode 100644 > index f60785f73d3d..000000000000 > --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt > +++ /dev/null > @@ -1,23 +0,0 @@ > -Tegra SOC USB controllers > - > -The device node for a USB controller that is part of a Tegra > -SOC is as described in the document "Open Firmware Recommended > -Practice : Universal Serial Bus" with the following modifications > -and additions : > - > -Required properties : > - - compatible : For Tegra20, must contain "nvidia,tegra20-ehci". > - For Tegra30, must contain "nvidia,tegra30-ehci". Otherwise, must contain > - "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is > - tegra114, tegra124, tegra132, or tegra210. > - - nvidia,phy : phandle of the PHY that the controller is connected to. > - - clocks : Must contain one entry, for the module clock. > - See ../clocks/clock-bindings.txt for details. > - - resets : Must contain an entry for each entry in reset-names. > - See ../reset/reset.txt for details. > - - reset-names : Must include the following entries: > - - usb > - > -Optional properties: > - - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20 > - USB ports, which need reset twice due to hardware issues. > diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.yaml > new file mode 100644 > index 000000000000..079cae44b8d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.yaml > @@ -0,0 +1,150 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/usb/nvidia,tegra20-ehci.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > + > +title: Device tree binding for NVIDIA Tegra USB controllers > + > +description: | > + The device node for a USB controller that is part of a Tegra SOC is as > + described in the document "Open Firmware Recommended Practice : Universal > + Serial Bus". Modifications and additions are detailed in this document. > + > +maintainers: > + - Thierry Reding <treding@xxxxxxxxxx> > + - Jon Hunter <jonathanh@xxxxxxxxxx> allOf: - $ref: usb-hcd.yaml# > + > +properties: > + compatible: > + oneOf: > + - items: > + - enum: > + - nvidia,tegra210-ehci > + - nvidia,tegra124-ehci > + - nvidia,tegra114-ehci > + - const: nvidia,tegra30-ehci > + - items: > + - const: nvidia,tegra30-ehci > + - items: > + - const: nvidia,tegra20-ehci > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + phy_type: > + $ref: /schemas/types.yaml#/definitions/string Already has a type (usb.yaml). You support all the possible modes? If not, list what is supported. > + > + clocks: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + reset-names: > + items: > + - const: usb > + > + nvidia,phy: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + phandle of the PHY that the controller is connected to > + > + nvidia,needs-double-reset: > + type: boolean > + description: > + This must be set for some instances of the USB controller found on > + Tegra20 that need to be reset twice due to some hardware issue. > + > +additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - resets > + - reset-names > + - phy_type > + - nvidia,phy > + > +examples: > + - | > + #include <dt-bindings/clock/tegra20-car.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + usb@c5000000 { > + compatible = "nvidia,tegra20-ehci"; > + reg = <0xc5000000 0x4000>; > + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; > + phy_type = "utmi"; > + clocks = <&tegra_car TEGRA20_CLK_USBD>; > + resets = <&tegra_car 22>; > + reset-names = "usb"; > + nvidia,needs-double-reset; > + nvidia,phy = <&phy1>; > + }; > + > + - | > + #include <dt-bindings/clock/tegra30-car.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + usb@7d000000 { > + compatible = "nvidia,tegra30-ehci"; > + reg = <0x7d000000 0x4000>; > + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; > + phy_type = "utmi"; > + clocks = <&tegra_car TEGRA30_CLK_USBD>; > + resets = <&tegra_car 22>; > + reset-names = "usb"; > + nvidia,needs-double-reset; > + nvidia,phy = <&phy1>; > + }; > + > + - | > + #include <dt-bindings/clock/tegra114-car.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + usb@7d000000 { > + compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; > + reg = <0x7d000000 0x4000>; > + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; > + phy_type = "utmi"; > + clocks = <&tegra_car TEGRA114_CLK_USBD>; > + resets = <&tegra_car 22>; > + reset-names = "usb"; > + nvidia,phy = <&phy1>; > + }; > + > + - | > + #include <dt-bindings/clock/tegra124-car.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + usb@7d000000 { > + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; > + reg = <0x7d000000 0x4000>; > + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; > + phy_type = "utmi"; > + clocks = <&tegra_car TEGRA124_CLK_USBD>; > + resets = <&tegra_car 22>; > + reset-names = "usb"; > + nvidia,phy = <&phy1>; > + }; > + > + - | > + #include <dt-bindings/clock/tegra210-car.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + usb@7d000000 { > + compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci"; > + reg = <0x7d000000 0x4000>; > + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; > + phy_type = "utmi"; > + clocks = <&tegra_car TEGRA210_CLK_USBD>; > + resets = <&tegra_car 22>; > + reset-names = "usb"; > + nvidia,phy = <&phy1>; > + }; > -- > 2.32.0 > >
