On Mon, Jul 05, 2021 at 07:44:21PM +0000, Marco De Marco wrote: > The patch is meant to support LARA-R6 Cat 1 module family. > > Module USB ID: > Vendor ID: 0x05c6 > Product ID: 0x90fA > > Interface layout: > If 0: Diagnostic > If 1: AT parser > If 2: AT parser > If 3: QMI wwan (not available in all versions) > > Signed-off-by: Marco De Marco <marco.demarco@xxxxxxxxxx> > > --- > > ADB interface is not available. > Diagnostic interface (If 0) can be used with option driver. > > Output of usb-devices command (this version does not have QMI WWAN): > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=05c6 ProdID=90fa Rev=00.00 > S: Manufacturer=Qualcomm, Incorporated > S: Product=Qualcomm CDMA Technologies MSM > S: SerialNumber=7da8aacd > C: #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=500mA > I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) > I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none) Now applied, thanks! Johan
