On Tue, Jun 15, 2021 at 1:08 AM Kyle Tso <kyletso@xxxxxxxxxx> wrote:
>
> If the voltage is being decreased in power negotiation, the Source will
> set the power supply to operate at the new voltage level before sending
> PS_RDY. For non-PPS negotiation, relax the disconnect threshold on Sink
> after receiving Accept Message to ensure the relaxed setting is enabled
> before the voltage collapse. For PPS, relax the threshold before
> sending Request Message so that it will not race with Source which
> begins to adjust the voltage right after it sends Accept Message.
>
> The real threshold will be set after Sink receives PS_RDY Message.
>
> Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support")
> Cc: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
> Signed-off-by: Kyle Tso <kyletso@xxxxxxxxxx>
> ---
> Changes since v1:
> - move the timing of setting threshold up to "before sending Request"
> for PPS power negotiation so that it won't race with the Source.
> - PPS: if it fails to send the Request, fallback to previous threshold
> - PPS: if the Source doesn't respond Accept, fallback to previous
> threshold
> - update the commit message for above changes
>
> drivers/usb/typec/tcpm/tcpm.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 0db685d5d9c0..00f3fd7c05d6 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -2599,6 +2599,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
> port->send_discover)
> port->vdm_sm_running = true;
>
> + /* Threshold was relaxed before sending Request. Restore it back. */
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> + port->pps_data.active,
> + port->supply_voltage);
> +
> tcpm_set_state(port, SNK_READY, 0);
> break;
> case DR_SWAP_SEND:
> @@ -2646,6 +2651,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
> switch (port->state) {
> case SNK_NEGOTIATE_CAPABILITIES:
> port->pps_data.active = false;
> + /* Voltage is going to be at new level. Relax the threshold here. */
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
> tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
> break;
> case SNK_NEGOTIATE_PPS_CAPABILITIES:
> @@ -3423,6 +3430,9 @@ static int tcpm_pd_send_pps_request(struct tcpm_port *port)
> if (ret < 0)
> return ret;
>
> + /* Relax the threshold as voltage will be adjusted right after Accept Message. */
This makes sense. Shouldn't we have the same approach for
tcpm_pd_send_request as it's equally applicable for fixed RDO as well
?
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
> +
> memset(&msg, 0, sizeof(msg));
> msg.header = PD_HEADER_LE(PD_DATA_REQUEST,
> port->pwr_role,
> @@ -4196,6 +4206,10 @@ static void run_state_machine(struct tcpm_port *port)
> case SNK_NEGOTIATE_PPS_CAPABILITIES:
> ret = tcpm_pd_send_pps_request(port);
> if (ret < 0) {
> + /* Restore back to the original state */
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> + port->pps_data.active,
> + port->supply_voltage);
> port->pps_status = ret;
> /*
> * If this was called due to updates to sink
> --
> 2.32.0.272.g935e593368-goog
>
