The USB PHY used in the Allwinner H616 SoC inherits some traits from its
various predecessors: it has four full PHYs like the H3, needs some
extra bits to be set like the H6, and puts SIDDQ on a different bit like
the A100. Plus it needs this weird PHY2 quirk.
Name all those properties in a new config struct and assign a new
compatible name to it.
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
drivers/phy/allwinner/phy-sun4i-usb.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 316ef5fca831..85a9771280b7 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -1024,6 +1024,17 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
.missing_phys = BIT(1) | BIT(2),
};
+static const struct sun4i_usb_phy_cfg sun50i_h616_cfg = {
+ .num_phys = 4,
+ .type = sun50i_h6_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .phy0_dual_route = true,
+ .hci_phy_ctl_clear = PHY_CTL_SIDDQ,
+ .needs_phy2_siddq = true,
+};
+
static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -1038,6 +1049,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun50i-a64-usb-phy",
.data = &sun50i_a64_cfg},
{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
+ { .compatible = "allwinner,sun50i-h616-usb-phy", .data = &sun50i_h616_cfg },
{ },
};
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
--
2.17.5
