RE: [PATCH v3 2/3] usb: host: xhci: add EH SINGLE_STEP_SET_FEATURE Test for USB2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Jun Li <jun.li@xxxxxxx>
> Sent: Friday, May 7, 2021 2:58 PM
> To: gregkh@xxxxxxxxxxxxxxxxxxx; stern@xxxxxxxxxxxxxxxxxxx;
> mathias.nyman@xxxxxxxxx
> Cc: peter.chen@xxxxxxxxxx; Jun Li <jun.li@xxxxxxx>; jackp@xxxxxxxxxxxxxx;
> linux-usb@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>
> Subject: [PATCH v3 2/3] usb: host: xhci: add EH SINGLE_STEP_SET_FEATURE Test
> for USB2
> 
> From: Peter Chen <peter.chen@xxxxxxx>
> 
> This function is similar with EHCI's, but implemented using XHCI.
> The USB2 host needs to send SETUP packet first, then wait 15 seconds before
> DATA (IN) + STATUS stage.
> 
> Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
> Signed-off-by: Li Jun <jun.li@xxxxxxx>
> ---
> Change for v3:
> - No change.
> 
> Change for v2:
> - No change.
> 
>  drivers/usb/host/xhci-hub.c  |  10 +++
>  drivers/usb/host/xhci-ring.c | 123 +++++++++++++++++++++++++++++++++++
>  drivers/usb/host/xhci.c      |   1 +
>  drivers/usb/host/xhci.h      |  10 +++
>  4 files changed, 144 insertions(+)
> 
> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> index e9b18fc17617..c64ee95cc89b 100644
> --- a/drivers/usb/host/xhci-hub.c
> +++ b/drivers/usb/host/xhci-hub.c
> @@ -1511,6 +1511,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq,
> u16 wValue,
>  			/* 4.19.6 Port Test Modes (USB2 Test Mode) */
>  			if (hcd->speed != HCD_USB2)
>  				goto error;
> +
> +#ifdef CONFIG_USB_HCD_TEST_MODE
> +			if (test_mode == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
> +				spin_unlock_irqrestore(&xhci->lock, flags);
> +				retval = ehset_single_step_set_feature(hcd,
> +								wIndex + 1);
> +				spin_lock_irqsave(&xhci->lock, flags);
> +				break;
> +			}
> +#endif
>  			if (test_mode > USB_TEST_FORCE_ENABLE ||
>  			    test_mode < USB_TEST_J)
>  				goto error;
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 05c38dd3ee36..87a9c1e3325a 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -3793,6 +3793,129 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t
> mem_flags,
>  	return 0;
>  }
> 
> +#ifdef CONFIG_USB_HCD_TEST_MODE
> +/*
> + * This function prepare TRBs and submits them for the
> + * SINGLE_STEP_SET_FEATURE Test.
> + * This is done in two parts: first SETUP req for GetDesc is sent then
> + * 15 seconds later, the IN stage for GetDesc starts to req data from
> +dev
> + *
> + * is_setup : argument decides which of the two stage needs to be
> + * performed; TRUE - SETUP and FALSE - IN+STATUS
> + * Returns 0 if success
> + */
> +int xhci_submit_single_step_set_feature(struct usb_hcd *hcd,
> +	struct urb *urb, int is_setup)
> +{
> +	int slot_id;
> +	unsigned int ep_index;
> +	struct xhci_ring *ep_ring;
> +	int ret;
> +	struct usb_ctrlrequest *setup;
> +	struct xhci_generic_trb *start_trb;
> +	int start_cycle;
> +	u32 field, length_field, remainder;
> +	struct urb_priv *urb_priv;
> +	struct xhci_td *td;
> +	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
> +
> +	/* urb_priv will be free after transcation has completed */
> +	urb_priv = kzalloc(sizeof(struct urb_priv) +
> +			sizeof(struct xhci_td), GFP_KERNEL);
> +	if (!urb_priv)
> +		return -ENOMEM;
> +
> +	td = &urb_priv->td[0];
> +	urb_priv->num_tds = 1;
> +	urb_priv->num_tds_done = 0;
> +	urb->hcpriv = urb_priv;
> +
> +	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
> +	if (!ep_ring) {
> +		ret = -EINVAL;
> +		goto free_priv;
> +	}
> +
> +	slot_id = urb->dev->slot_id;
> +	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
> +
> +	setup = (struct usb_ctrlrequest *) urb->setup_packet;
> +	if (is_setup) {
> +		ret = prepare_transfer(xhci, xhci->devs[slot_id],
> +				ep_index, urb->stream_id,
> +				1, urb, 0, GFP_KERNEL);
> +		if (ret < 0)
> +			goto free_priv;
> +
> +		start_trb = &ep_ring->enqueue->generic;
> +		start_cycle = ep_ring->cycle_state;
> +		/* Save the DMA address of the last TRB in the TD */
> +		td->last_trb = ep_ring->enqueue;
> +		field = TRB_IOC | TRB_IDT | TRB_TYPE(TRB_SETUP) | start_cycle;
> +		/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
> +		if ((xhci->hci_version >= 0x100) ||
> +				(xhci->quirks & XHCI_MTK_HOST))
> +			field |= TRB_TX_TYPE(TRB_DATA_IN);
> +
> +		queue_trb(xhci, ep_ring, false,
> +			  setup->bRequestType | setup->bRequest << 8 |
> +			  le16_to_cpu(setup->wValue) << 16,
> +			  le16_to_cpu(setup->wIndex) |
> +			  le16_to_cpu(setup->wLength) << 16,
> +			  TRB_LEN(8) | TRB_INTR_TARGET(0),
> +			  /* Immediate data in pointer */
> +			  field);
> +		giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
> +				start_cycle, start_trb);
> +		return 0;
> +	}
> +
> +	ret = prepare_transfer(xhci, xhci->devs[slot_id],
> +			ep_index, urb->stream_id,
> +			2, urb, 0, GFP_KERNEL);
> +	if (ret < 0)
> +		goto free_priv;
> +
> +	start_trb = &ep_ring->enqueue->generic;
> +	start_cycle = ep_ring->cycle_state;
> +	field = TRB_ISP | TRB_TYPE(TRB_DATA);
> +
> +	remainder = xhci_td_remainder(xhci, 0,
> +				   urb->transfer_buffer_length,
> +				   urb->transfer_buffer_length,
> +				   urb, 1);
> +
> +	length_field = TRB_LEN(urb->transfer_buffer_length) |
> +		TRB_TD_SIZE(remainder) |
> +		TRB_INTR_TARGET(0);
> +
> +	if (urb->transfer_buffer_length > 0) {
> +		field |= TRB_DIR_IN;
> +		queue_trb(xhci, ep_ring, true,
> +				lower_32_bits(urb->transfer_dma),
> +				upper_32_bits(urb->transfer_dma),
> +				length_field,
> +				field | ep_ring->cycle_state);
> +	}
> +
> +	td->last_trb = ep_ring->enqueue;
> +	field = TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state;
> +	queue_trb(xhci, ep_ring, false,
> +			0,
> +			0,
> +			TRB_INTR_TARGET(0),
> +			field);
> +
> +	giveback_first_trb(xhci, slot_id, ep_index, 0,
> +			start_cycle, start_trb);
> +
> +	return 0;
> +free_priv:
> +	xhci_urb_free_priv(urb_priv);
> +	return ret;
> +}
> +#endif /* CONFIG_USB_HCD_TEST_MODE */
> +
>  /*
>   * The transfer burst count field of the isochronous TRB defines the number
> of
>   * bursts that are required to move all packets in this TD.  Only SuperSpeed
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index
> ca9385d22f68..a27616775845 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -5426,6 +5426,7 @@ static const struct hc_driver xhci_hc_driver = {
>  	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
>  	.find_raw_port_number =	xhci_find_raw_port_number,
>  	.clear_tt_buffer_complete = xhci_clear_tt_buffer_complete,
> +	.submit_single_step_set_feature	=
> xhci_submit_single_step_set_feature,
>  };
> 
>  void xhci_init_driver(struct hc_driver *drv, diff --git
> a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index
> 2595a8f057c4..f93fc8f59af6 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -2165,6 +2165,16 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd,
> int port1);  struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
> 
>  void xhci_hc_died(struct xhci_hcd *xhci);
> +#ifdef CONFIG_USB_HCD_TEST_MODE
> +int xhci_submit_single_step_set_feature(struct usb_hcd *hcd,
> +	struct urb *urb, int is_setup);
> +#else
> +static inline int xhci_submit_single_step_set_feature(struct usb_hcd
> *hcd,
> +	struct urb *urb, int is_setup)
> +{
> +	return 0;
> +}
> +#endif
> 
>  #ifdef CONFIG_PM
>  int xhci_bus_suspend(struct usb_hcd *hcd);
> --
> 2.25.1

A gentle ping.

Li Jun





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux