On Wed, Jun 09, 2021 at 03:12:37PM +0200, Heiner Kallweit wrote:
> On 09.06.2021 14:46, Oleksij Rempel wrote:
> > Hi Marek,
> >
> > On Wed, Jun 09, 2021 at 11:59:23AM +0200, Marek Szyprowski wrote:
> >> Hi Oleksij,
> >>
> >> On 07.06.2021 10:27, Oleksij Rempel wrote:
> >>> To be able to use ax88772 with external PHYs and use advantage of
> >>> existing PHY drivers, we need to port at least ax88772 part of asix
> >>> driver to the phylib framework.
> >>>
> >>> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> >>
> >> This patch landed recently in linux-next as commit e532a096be0e ("net:
> >> usb: asix: ax88772: add phylib support"). I found that it causes some
> >> warnings on boards with those devices, see the following log:
> >>
> >> root@target:~# time rtcwake -s10 -mmem
> >> rtcwake: wakeup from "mem" using /dev/rtc0 at Wed Jun 9 08:16:41 2021
> >> [ 231.226579] PM: suspend entry (deep)
> >> [ 231.231697] Filesystems sync: 0.002 seconds
> >> [ 231.261761] Freezing user space processes ... (elapsed 0.002 seconds)
> >> done.
> >> [ 231.270526] OOM killer disabled.
> >> [ 231.273557] Freezing remaining freezable tasks ... (elapsed 0.002
> >> seconds) done.
> >> [ 231.282229] printk: Suspending console(s) (use no_console_suspend to
> >> debug)
> >> ...
> >> [ 231.710852] Disabling non-boot CPUs ...
> >> ...
> >> [ 231.901794] Enabling non-boot CPUs ...
> >> ...
> >> [ 232.225640] usb usb3: root hub lost power or was reset
> >> [ 232.225746] usb usb1: root hub lost power or was reset
> >> [ 232.225864] usb usb5: root hub lost power or was reset
> >> [ 232.226206] usb usb6: root hub lost power or was reset
> >> [ 232.226207] usb usb4: root hub lost power or was reset
> >> [ 232.297749] usb usb2: root hub lost power or was reset
> >> [ 232.343227] asix 3-1:1.0 eth0: Failed to write reg index 0x0000: -22
> >> [ 232.343293] asix 3-1:1.0 eth0: Failed to enable software MII access
> >> [ 232.344486] asix 3-1:1.0 eth0: Failed to read reg index 0x0000: -22
> >> [ 232.344512] asix 3-1:1.0 eth0: Failed to write reg index 0x0000: -22
> >> [ 232.344529] PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0x78
> >> returns -22
> >> [ 232.344554] Asix Electronics AX88772C usb-003:002:10: PM: failed to
> >> resume: error -22
> >> [ 232.563712] usb 1-1: reset high-speed USB device number 2 using
> >> exynos-ehci
> >> [ 232.757653] usb 3-1: reset high-speed USB device number 2 using xhci-hcd
> >> [ 233.730994] OOM killer enabled.
> >> [ 233.734122] Restarting tasks ... done.
> >> [ 233.754992] PM: suspend exit
> >>
> >> real 0m11.546s
> >> user 0m0.000s
> >> sys 0m0.530s
> >> root@target:~# sleep 2
> >> root@target:~# time rtcwake -s10 -mmem
> >> rtcwake: wakeup from "mem" using /dev/rtc0 at Wed Jun 9 08:17:02 2021
> >> [ 241.959608] PM: suspend entry (deep)
> >> [ 241.963446] Filesystems sync: 0.001 seconds
> >> [ 241.978619] Freezing user space processes ... (elapsed 0.004 seconds)
> >> done.
> >> [ 241.989199] OOM killer disabled.
> >> [ 241.992215] Freezing remaining freezable tasks ... (elapsed 0.005
> >> seconds) done.
> >> [ 242.003979] printk: Suspending console(s) (use no_console_suspend to
> >> debug)
> >> ...
> >> [ 242.592030] Disabling non-boot CPUs ...
> >> ...
> >> [ 242.879721] Enabling non-boot CPUs ...
> >> ...
> >> [ 243.145870] usb usb3: root hub lost power or was reset
> >> [ 243.145910] usb usb4: root hub lost power or was reset
> >> [ 243.147084] usb usb5: root hub lost power or was reset
> >> [ 243.147157] usb usb6: root hub lost power or was reset
> >> [ 243.147298] usb usb1: root hub lost power or was reset
> >> [ 243.217137] usb usb2: root hub lost power or was reset
> >> [ 243.283807] asix 3-1:1.0 eth0: Failed to write reg index 0x0000: -22
> >> [ 243.284005] asix 3-1:1.0 eth0: Failed to enable software MII access
> >> [ 243.285526] asix 3-1:1.0 eth0: Failed to read reg index 0x0000: -22
> >> [ 243.285676] asix 3-1:1.0 eth0: Failed to read reg index 0x0004: -22
> >> [ 243.285769] ------------[ cut here ]------------
> >> [ 243.286011] WARNING: CPU: 2 PID: 2069 at drivers/net/phy/phy.c:916
> >> phy_error+0x28/0x68
> >> [ 243.286115] Modules linked in: cmac bnep mwifiex_sdio mwifiex
> >> sha256_generic libsha256 sha256_arm cfg80211 btmrvl_sdio btmrvl
> >> bluetooth s5p_mfc uvcvideo s5p_jpeg exynos_gsc v
> >> [ 243.287490] CPU: 2 PID: 2069 Comm: kworker/2:5 Not tainted
> >> 5.13.0-rc5-next-20210608 #10443
> >> [ 243.287555] Hardware name: Samsung Exynos (Flattened Device Tree)
> >> [ 243.287609] Workqueue: events_power_efficient phy_state_machine
> >> [ 243.287716] [<c0111920>] (unwind_backtrace) from [<c010d0cc>]
> >> (show_stack+0x10/0x14)
> >> [ 243.287807] [<c010d0cc>] (show_stack) from [<c0b62360>]
> >> (dump_stack_lvl+0xa0/0xc0)
> >> [ 243.287882] [<c0b62360>] (dump_stack_lvl) from [<c0127960>]
> >> (__warn+0x118/0x11c)
> >> [ 243.287954] [<c0127960>] (__warn) from [<c0127a18>]
> >> (warn_slowpath_fmt+0xb4/0xbc)
> >> [ 243.288021] [<c0127a18>] (warn_slowpath_fmt) from [<c0734968>]
> >> (phy_error+0x28/0x68)
> >> [ 243.288094] [<c0734968>] (phy_error) from [<c0735d6c>]
> >> (phy_state_machine+0x218/0x278)
> >> [ 243.288173] [<c0735d6c>] (phy_state_machine) from [<c014ae08>]
> >> (process_one_work+0x30c/0x884)
> >> [ 243.288254] [<c014ae08>] (process_one_work) from [<c014b3d8>]
> >> (worker_thread+0x58/0x594)
> >> [ 243.288333] [<c014b3d8>] (worker_thread) from [<c0153944>]
> >> (kthread+0x160/0x1c0)
> >> [ 243.288408] [<c0153944>] (kthread) from [<c010011c>]
> >> (ret_from_fork+0x14/0x38)
> >> [ 243.288475] Exception stack(0xc4683fb0 to 0xc4683ff8)
> >> [ 243.288531] 3fa0: 00000000
> >> 00000000 00000000 00000000
> >> [ 243.288587] 3fc0: 00000000 00000000 00000000 00000000 00000000
> >> 00000000 00000000 00000000
> >> [ 243.288641] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> >> [ 243.288690] irq event stamp: 1611
> >> [ 243.288744] hardirqs last enabled at (1619): [<c01a6ef0>]
> >> vprintk_emit+0x230/0x290
> >> [ 243.288830] hardirqs last disabled at (1626): [<c01a6f2c>]
> >> vprintk_emit+0x26c/0x290
> >> [ 243.288906] softirqs last enabled at (1012): [<c0101768>]
> >> __do_softirq+0x500/0x63c
> >> [ 243.288978] softirqs last disabled at (1007): [<c01315b4>]
> >> irq_exit+0x214/0x220
> >> [ 243.289055] ---[ end trace eeacda95eb7db60a ]---
> >> [ 243.289345] asix 3-1:1.0 eth0: Failed to write reg index 0x0000: -22
> >> [ 243.289466] asix 3-1:1.0 eth0: Failed to write Medium Mode mode to
> >> 0x0000: ffffffea
> >> [ 243.289540] asix 3-1:1.0 eth0: Link is Down
> >> [ 243.482809] usb 1-1: reset high-speed USB device number 2 using
> >> exynos-ehci
> >> [ 243.647251] usb 3-1: reset high-speed USB device number 2 using xhci-hcd
> >> [ 244.847161] OOM killer enabled.
> >> [ 244.850221] Restarting tasks ... done.
> >> [ 244.861372] PM: suspend exit
> >>
> >> real 0m13.050s
> >> user 0m0.000s
> >> sys 0m1.152s
> >> root@target:~#
> >>
> >> It looks that some kind of system suspend/resume integration for phylib
> >> is not implemented.
> >
> > Probably it is should be handled only by the asix driver. I'll take a
> > look in to it. Did interface was able to resume after printing some
> > warnings?
> >
> > Regards,
> > Oleksij
> >
>
> Maybe it's a use case for the new mac_managed_pm flag, see
> fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
>
Thx! this is the right one :)
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
