Re: [PATCH v4 2/2] USB: serial: blacklist USB-UIRT when driver is selected

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 10, 2021 at 12:23:53PM +0200, Greg Kroah-Hartman wrote:
> On Thu, Jun 10, 2021 at 11:16:25AM +0100, Sean Young wrote:
> > The USB-UIRT device has its own driver, so blacklist the fdti driver
> > from using it if the driver has been enabled.
> > 
> > Signed-off-by: Sean Young <sean@xxxxxxxx>
> > ---
> >  drivers/usb/serial/ftdi_sio.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
> > index 369ef140df78..2e9a9076a38d 100644
> > --- a/drivers/usb/serial/ftdi_sio.c
> > +++ b/drivers/usb/serial/ftdi_sio.c
> > @@ -106,7 +106,7 @@ static const struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
> >  	.probe	= ftdi_NDI_device_setup,
> >  };
> >  
> > -static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
> > +static __maybe_unused const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
> 
> Why make this change?

If CONFIG_IR_UIRT is enabled, then this struct is not used. This generates
a warning when compiling with W=1 (clang or gcc):

  CC [M]  drivers/usb/serial/ftdi_sio.o
drivers/usb/serial/ftdi_sio.c:109:36: warning: ‘ftdi_USB_UIRT_quirk’ defined but not used [-Wunused-const-variable=]
  109 | static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
      |                                    ^~~~~~~~~~~~~~~~~~~

> 
> >  	.port_probe = ftdi_USB_UIRT_setup,
> >  };
> >  
> > @@ -568,8 +568,10 @@ static const struct usb_device_id id_table_combined[] = {
> >  	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
> >  	{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
> >  		.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
> > +#if !IS_ENABLED(CONFIG_IR_UIRT)
> >  	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
> >  		.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
> > +#endif
> >  	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
> >  	{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
> >  	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
> > @@ -2281,7 +2283,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
> >  /* Setup for the USB-UIRT device, which requires hardwired
> >   * baudrate (38400 gets mapped to 312500) */
> >  /* Called from usbserial:serial_probe */
> > -static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
> > +static __maybe_unused void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
> 
> Again, why this change here?

Same again.


Thanks for reviewing.

Sean



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux