Re: [PATCH] usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/06/2021 at 14:10, Claudiu Beznea wrote:
On SAMA7G5 suspending ports will cut the access to OHCI registers and
any subsequent access to them will lead to CPU being blocked trying to
access that memory. Same thing happens on resume: if OHCI memory is
accessed before resuming ports the CPU will block on that access. The
OCHI memory is accessed on suspend/resume though
ohci_suspend()/ohci_resume().

Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

Claudiu,

Your patch look good to me.

In addition, I see ohci_at91_port_suspend() function also used in ohci_at91_hub_control(). It might suffer the same problem as I see accesses to ohci register, at first glance.

Can you please double check that we are not in such condition with calls to ohci_at91_hub_control()?

Best regards,
  Nicolas


---

The patch was tested on SAMA7G5, SAMA5D2 and SAM9X60.

Thank you,
Claudiu Beznea

  drivers/usb/host/ohci-at91.c | 9 +++++----
  1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index b3a6a497dcb1..7c6202b05ff4 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -666,8 +666,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
  	if (ohci_at91->wakeup)
  		enable_irq_wake(hcd->irq);
- ohci_at91_port_suspend(ohci_at91, 1);
-
  	ret = ohci_suspend(hcd, ohci_at91->wakeup);
  	if (ret) {
  		if (ohci_at91->wakeup)
@@ -687,7 +685,10 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
  		/* flush the writes */
  		(void) ohci_readl (ohci, &ohci->regs->control);
  		msleep(1);
+		ohci_at91_port_suspend(ohci_at91, 1);
  		at91_stop_clock(ohci_at91);
+	} else {
+		ohci_at91_port_suspend(ohci_at91, 1);
  	}
return ret;
@@ -699,6 +700,8 @@ ohci_hcd_at91_drv_resume(struct device *dev)
  	struct usb_hcd	*hcd = dev_get_drvdata(dev);
  	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+ ohci_at91_port_suspend(ohci_at91, 0);
+
  	if (ohci_at91->wakeup)
  		disable_irq_wake(hcd->irq);
  	else
@@ -706,8 +709,6 @@ ohci_hcd_at91_drv_resume(struct device *dev)
ohci_resume(hcd, false); - ohci_at91_port_suspend(ohci_at91, 0);
-
  	return 0;
  }


--
Nicolas Ferre



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux