From: Maciej Żenczykowski <maze@xxxxxxxxxx> The reasoning for this change is that if we already had a packet pending, then we also already had a pending timer, and as such there is no need to reschedule it. This also prevents packets getting delayed 60 ms worst case under a tiny packet every 290us transmit load, by keeping the timeout always relative to the first queued up packet. (300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms) As such the first packet is now at most delayed by 300us. Under low transmit load, this will simply result in us sending a shorter aggregate, as originally intended. This patch has the benefit of greatly reducing (by ~10 factor with 1500 byte frames aggregated into 16 kiB) the number of (potentially pretty costly) updates to the hrtimer. Cc: Brooke Basile <brookebasile@xxxxxxxxx> Cc: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> Cc: Felipe Balbi <balbi@xxxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: Lorenzo Colitti <lorenzo@xxxxxxxxxx> Signed-off-by: Maciej Żenczykowski <maze@xxxxxxxxxx> --- drivers/usb/gadget/function/f_ncm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 0d23c6c11a13..855127249f24 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1101,11 +1101,11 @@ static struct sk_buff *ncm_wrap_ntb(struct gether *port, ncm->ndp_dgram_count = 1; /* Note: we skip opts->next_ndp_index */ - } - /* Delay the timer. */ - hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS, - HRTIMER_MODE_REL_SOFT); + /* Start the timer. */ + hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS, + HRTIMER_MODE_REL_SOFT); + } /* Add the datagram position entries */ ntb_ndp = skb_put_zero(ncm->skb_tx_ndp, dgram_idx_len); -- 2.32.0.rc1.229.g3e70b5a671-goog