[PATCH 12/23] usb: mtu3: use force mode for dual role switch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Force IDDIG status for all three ways of dual role switch, this
is needed when use Type-C to switch mode.

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
 drivers/usb/mtu3/mtu3_dr.c   | 10 +++-------
 drivers/usb/mtu3/mtu3_host.c |  6 +-----
 2 files changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
index 486d26a366b8..cf9e5b59a77e 100644
--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -148,12 +148,14 @@ static void ssusb_mode_sw_work(struct work_struct *work)
 
 	switch (desired_role) {
 	case USB_ROLE_HOST:
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
 		mtu3_stop(mtu);
 		switch_port_to_host(ssusb);
 		ssusb_set_vbus(otg_sx, 1);
 		ssusb->is_host = true;
 		break;
 	case USB_ROLE_DEVICE:
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
 		ssusb->is_host = false;
 		ssusb_set_vbus(otg_sx, 0);
 		switch_port_to_device(ssusb);
@@ -225,13 +227,7 @@ void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	if (to_host) {
-		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
-		ssusb_set_mode(otg_sx, USB_ROLE_HOST);
-	} else {
-		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
-		ssusb_set_mode(otg_sx, USB_ROLE_DEVICE);
-	}
+	ssusb_set_mode(otg_sx, to_host ? USB_ROLE_HOST : USB_ROLE_DEVICE);
 }
 
 void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index 0a8cd446cf1b..93a1a4c11e1e 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -213,8 +213,6 @@ int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
 
 static void ssusb_host_setup(struct ssusb_mtk *ssusb)
 {
-	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
-
 	host_ports_num_get(ssusb);
 
 	/*
@@ -222,9 +220,7 @@ static void ssusb_host_setup(struct ssusb_mtk *ssusb)
 	 * if support OTG, gadget driver will switch port0 to device mode
 	 */
 	ssusb_host_enable(ssusb);
-
-	if (otg_sx->manual_drd_enabled)
-		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
+	ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
 
 	/* if port0 supports dual-role, works as host mode by default */
 	ssusb_set_vbus(&ssusb->otg_switch, 1);
-- 
2.18.0




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux