> > > @@ -13,6 +13,7 @@ config USB_MUSB_HDRC > > > select NOP_USB_XCEIV if ARCH_DAVINCI > > > select TWL4030_USB if MACH_OMAP_3430SDP > > > select NOP_USB_XCEIV if MACH_OMAP3EVM > > > + select NOP_USB_XCEIV if MACH_OMAP3_BEAGLE > > > > Shouldn't we be selecting TWL4030_USB if MACH_OMAP3_BEAGLE. > > The beagleboard does use the PHY in the TWL4030, and not > > a transparent PHY. > > > Could be. I have no very much idea of these :-) Beagle has to use TWL4030_USB only and not NOP_USB_XCEIV. The NOP registration was removed from common file usb-musb.c to board specific file because different board uses different transceiver. > > I happened to have both of these below enabled and 2.6.31-rc5 was still > booting. > > CONFIG_TWL4030_USB=y > CONFIG_NOP_USB_XCEIV=y > > But anyway, I don't get Beagle booting with 2.6.31-rc6 if I disable any > of them and IRCC another oops will follow if both are disabled. For Beagle; only CONFIG_TWL4030_USB=y is required and should work with that alone. > There's a patch from me adding back the twl4030_usb pdata to beagle > board-file and another one from Paul which changed the defconfig. It seems this dependency might be the cause why CONFIG_TWL4030_USB=y alone didn't work as reported by Nikula. > It should be easy to find on the archives. Eduardo Valentin reported > that to me so I was asking him to test the stuff for me. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
