Re: [PATCH] usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21-05-24 21:29:22, Jack Pham wrote:
> There exists a possible scenario in which dwc3_gadget_init() can fail:
> during during host -> peripheral mode switch in dwc3_set_mode(), and
> a pending gadget driver fails to bind.  Then, if the DRD undergoes
> another mode switch from peripheral->host the resulting
> dwc3_gadget_exit() will attempt to reference an invalid and dangling
> dwc->gadget pointer as well as call dma_free_coherent() on unmapped
> DMA pointers.
> 
> The exact scenario can be reproduced as follows:
>  - Start DWC3 in peripheral mode
>  - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs)
>  - Run FunctionFS userspace application (open EPs, write descriptors, etc)
>  - Bind gadget driver to DWC3's UDC
>  - Switch DWC3 to host mode
>    => dwc3_gadget_exit() is called. usb_del_gadget() will put the
> 	ConfigFS driver instance on the gadget_driver_pending_list
>  - Stop FunctionFS application (closes the ep files)
>  - Switch DWC3 to peripheral mode
>    => dwc3_gadget_init() fails as usb_add_gadget() calls
> 	check_pending_gadget_drivers() and attempts to rebind the UDC
> 	to the ConfigFS gadget but fails with -19 (-ENODEV) because the
> 	FFS instance is not in FFS_READY state.

There is no such state at enum ffs_state, you mean flag desc_ready is not
true, right?

>  - Switch DWC3 back to host mode
>    => dwc3_gadget_exit() is called again, but this time dwc->gadget
> 	is invalid.
> 
> Although it can be argued that userspace should take responsibility
> for ensuring that the FunctionFS application be ready prior to
> allowing the composite driver bind to the UDC, failure to do so
> should not result in a panic from the kernel driver.
> 
> Fix this by setting dwc->gadget to NULL in the failure path of
> dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out
> unless the gadget pointer is valid.
> 
> Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Jack Pham <jackp@xxxxxxxxxxxxxx>

Reviewed-by: Peter Chen <peter.chen@xxxxxxxxxx>

Peter

> ---
> Hi Felipe,
> 
> Although I marked the 'Fixes' tag above to e81a7018d93a, the problem
> theoretically exists prior to Peter's change. But I'm not sure how
> best to fix on versions prior to this change since dwc->gadget used
> to be an embedded struct so we can't do a simple NULL check as below.
> Suggestions on alternative approaches welcome if we want to proceed
> with backporting to older (pre-5.9) stable releases.
> 
> Thanks,
> Jack
> 
>  drivers/usb/dwc3/gadget.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 612825a39f82..65d9b7227752 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -4046,6 +4046,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
>  	dwc3_gadget_free_endpoints(dwc);
>  err4:
>  	usb_put_gadget(dwc->gadget);
> +	dwc->gadget = NULL;
>  err3:
>  	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
>  			dwc->bounce_addr);
> @@ -4065,6 +4066,9 @@ int dwc3_gadget_init(struct dwc3 *dwc)
>  
>  void dwc3_gadget_exit(struct dwc3 *dwc)
>  {
> +	if (!dwc->gadget)
> +		return;
> +
>  	usb_del_gadget(dwc->gadget);
>  	dwc3_gadget_free_endpoints(dwc);
>  	usb_put_gadget(dwc->gadget);
> -- 
> 2.24.0
> 

-- 

Thanks,
Peter Chen




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux