On Tue, May 25, 2021 at 09:01:44AM +0200, Johan Hovold wrote: > On Sun, May 23, 2021 at 06:35:21PM +0200, Alexandre GRIVEAUX wrote: > > Adding Zyxel Omni 56K Plus modem, this modem include: > > Nit: In the future, try to use imperative mood in your commit messages > (i.e. use "add" rather than "adding"). > Hello, Ok. > Also, why is there a RESEND prefix in the subject? This is the first > time I see this patch. For the RESEND, I have a residual mailname file with "localhost.localdomain" inside, i've checked log, some address received messages, so i've changed the subject prefix to "resend". sorry for that. Thanks. > > > USB chip: > > NetChip > > NET2888 > > > > Main chip: > > 901041A > > F721501APGF > > > > Another modem using the same chips is the Zyxel Omni 56K DUO/NEO, > > could be added with the right USB ID. > > > > Signed-off-by: Alexandre GRIVEAUX <agriveaux@xxxxxxxxxxxx> > > --- > > drivers/usb/serial/omninet.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c > > index 83c62f920c50..8be91f5a4dd7 100644 > > --- a/drivers/usb/serial/omninet.c > > +++ b/drivers/usb/serial/omninet.c > > @@ -26,6 +26,7 @@ > > > > #define ZYXEL_VENDOR_ID 0x0586 > > #define ZYXEL_OMNINET_ID 0x1000 > > +#define ZYXEL_OMNI_56K_PLUS_ID 0x1500 > > /* This one seems to be a re-branded ZyXEL device */ > > #define BT_IGNITIONPRO_ID 0x2000 > > > > @@ -41,6 +42,7 @@ static void omninet_port_remove(struct usb_serial_port *port); > > static const struct usb_device_id id_table[] = { > > { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, > > { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) }, > > + { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) }, > > { } /* Terminating entry */ > > }; > > MODULE_DEVICE_TABLE(usb, id_table); > > Now applied with a slightly modified commit message. Thanks. > > Johan