The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the four control requests which erroneously used usb_rcvctrlpipe().
Fixes: 1d3e20236d7a ("[PATCH] USB: usbtouchscreen: unified USB touchscreen driver")
Fixes: 24ced062a296 ("usbtouchscreen: add support for DMC TSC-10/25 devices")
Fixes: 9e3b25837a20 ("Input: usbtouchscreen - add support for e2i touchscreen controller")
Cc: stable@xxxxxxxxxxxxxxx # 2.6.17
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
Changes in v2
- include also the request in e2i_init which did not use USB_DIR_OUT
drivers/input/touchscreen/usbtouchscreen.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index c847453a03c2..43c521f50c85 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -251,7 +251,7 @@ static int e2i_init(struct usbtouch_usb *usbtouch)
int ret;
struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
- ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x01, 0x02, 0x0000, 0x0081,
NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -531,7 +531,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
if (ret)
return ret;
- ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
MTOUCHUSB_RESET,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -543,7 +543,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
msleep(150);
for (i = 0; i < 3; i++) {
- ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
MTOUCHUSB_ASYNC_REPORT,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -722,7 +722,7 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
}
/* start sending data */
- ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
TSC10_CMD_DATA1,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
--
2.26.3
