On Sun, May 23, 2021 at 4:23 AM kernel test robot <lkp@xxxxxxxxx> wrote: > > Hi Kyle, > > Thank you for the patch! Perhaps something to improve: > > [auto build test WARNING on usb/usb-testing] > [also build test WARNING on v5.13-rc2 next-20210521] > [If your patch is applied to the wrong git tree, kindly drop us a note. > And when submitting patch, we suggest to use '--base' as documented in > https://git-scm.com/docs/git-format-patch] > > url: https://github.com/0day-ci/linux/commits/Kyle-Tso/Fix-some-VDM-AMS-handling/20210522-205431 > base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing > config: x86_64-randconfig-a006-20210523 (attached as .config) > compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project e84a9b9bb3051c35dea993cdad7b3d2575638f85) > reproduce (this is a W=1 build): > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross > chmod +x ~/bin/make.cross > # install x86_64 cross compiling tool for clang build > # apt-get install binutils-x86-64-linux-gnu > # https://github.com/0day-ci/linux/commit/6e05980ae46e87d0a409e1e653658ae6fd7b3a32 > git remote add linux-review https://github.com/0day-ci/linux > git fetch --no-tags linux-review Kyle-Tso/Fix-some-VDM-AMS-handling/20210522-205431 > git checkout 6e05980ae46e87d0a409e1e653658ae6fd7b3a32 > # save the attached .config to linux build tree > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64 > > If you fix the issue, kindly add following tag as appropriate > Reported-by: kernel test robot <lkp@xxxxxxxxx> > > All warnings (new ones prefixed by >>): > > >> drivers/usb/typec/tcpm/tcpm.c:2326:19: warning: equality comparison result unused [-Wunused-comparison] > port->vdm_state == VDM_STATE_ERR_BUSY; > ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ > drivers/usb/typec/tcpm/tcpm.c:2326:19: note: use '=' to turn this equality comparison into an assignment > port->vdm_state == VDM_STATE_ERR_BUSY; > ^~ > = > 1 warning generated. > > Fixed in v2 https://lore.kernel.org/linux-usb/20210523015855.1785484-1-kyletso@xxxxxxxxxx/ thanks, Kyle > vim +2326 drivers/usb/typec/tcpm/tcpm.c > > 2313 > 2314 static void tcpm_pd_data_request(struct tcpm_port *port, > 2315 const struct pd_message *msg) > 2316 { > 2317 enum pd_data_msg_type type = pd_header_type_le(msg->header); > 2318 unsigned int cnt = pd_header_cnt_le(msg->header); > 2319 unsigned int rev = pd_header_rev_le(msg->header); > 2320 unsigned int i; > 2321 enum frs_typec_current partner_frs_current; > 2322 bool frs_enable; > 2323 int ret; > 2324 > 2325 if (tcpm_vdm_ams(port) && type != PD_DATA_VENDOR_DEF) { > > 2326 port->vdm_state == VDM_STATE_ERR_BUSY; > 2327 tcpm_ams_finish(port); > 2328 mod_vdm_delayed_work(port, 0); > 2329 } > 2330 > 2331 switch (type) { > 2332 case PD_DATA_SOURCE_CAP: > 2333 for (i = 0; i < cnt; i++) > 2334 port->source_caps[i] = le32_to_cpu(msg->payload[i]); > 2335 > 2336 port->nr_source_caps = cnt; > 2337 > 2338 tcpm_log_source_caps(port); > 2339 > 2340 tcpm_validate_caps(port, port->source_caps, > 2341 port->nr_source_caps); > 2342 > 2343 /* > 2344 * Adjust revision in subsequent message headers, as required, > 2345 * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't > 2346 * support Rev 1.0 so just do nothing in that scenario. > 2347 */ > 2348 if (rev == PD_REV10) { > 2349 if (port->ams == GET_SOURCE_CAPABILITIES) > 2350 tcpm_ams_finish(port); > 2351 break; > 2352 } > 2353 > 2354 if (rev < PD_MAX_REV) > 2355 port->negotiated_rev = rev; > 2356 > 2357 if (port->pwr_role == TYPEC_SOURCE) { > 2358 if (port->ams == GET_SOURCE_CAPABILITIES) > 2359 tcpm_pd_handle_state(port, SRC_READY, NONE_AMS, 0); > 2360 /* Unexpected Source Capabilities */ > 2361 else > 2362 tcpm_pd_handle_msg(port, > 2363 port->negotiated_rev < PD_REV30 ? > 2364 PD_MSG_CTRL_REJECT : > 2365 PD_MSG_CTRL_NOT_SUPP, > 2366 NONE_AMS); > 2367 } else if (port->state == SNK_WAIT_CAPABILITIES) { > 2368 /* > 2369 * This message may be received even if VBUS is not > 2370 * present. This is quite unexpected; see USB PD > 2371 * specification, sections 8.3.3.6.3.1 and 8.3.3.6.3.2. > 2372 * However, at the same time, we must be ready to > 2373 * receive this message and respond to it 15ms after > 2374 * receiving PS_RDY during power swap operations, no matter > 2375 * if VBUS is available or not (USB PD specification, > 2376 * section 6.5.9.2). > 2377 * So we need to accept the message either way, > 2378 * but be prepared to keep waiting for VBUS after it was > 2379 * handled. > 2380 */ > 2381 port->ams = POWER_NEGOTIATION; > 2382 port->in_ams = true; > 2383 tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); > 2384 } else { > 2385 if (port->ams == GET_SOURCE_CAPABILITIES) > 2386 tcpm_ams_finish(port); > 2387 tcpm_pd_handle_state(port, SNK_NEGOTIATE_CAPABILITIES, > 2388 POWER_NEGOTIATION, 0); > 2389 } > 2390 break; > 2391 case PD_DATA_REQUEST: > 2392 /* > 2393 * Adjust revision in subsequent message headers, as required, > 2394 * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't > 2395 * support Rev 1.0 so just reject in that scenario. > 2396 */ > 2397 if (rev == PD_REV10) { > 2398 tcpm_pd_handle_msg(port, > 2399 port->negotiated_rev < PD_REV30 ? > 2400 PD_MSG_CTRL_REJECT : > 2401 PD_MSG_CTRL_NOT_SUPP, > 2402 NONE_AMS); > 2403 break; > 2404 } > 2405 > 2406 if (rev < PD_MAX_REV) > 2407 port->negotiated_rev = rev; > 2408 > 2409 if (port->pwr_role != TYPEC_SOURCE || cnt != 1) { > 2410 tcpm_pd_handle_msg(port, > 2411 port->negotiated_rev < PD_REV30 ? > 2412 PD_MSG_CTRL_REJECT : > 2413 PD_MSG_CTRL_NOT_SUPP, > 2414 NONE_AMS); > 2415 break; > 2416 } > 2417 > 2418 port->sink_request = le32_to_cpu(msg->payload[0]); > 2419 > 2420 if (port->vdm_sm_running && port->explicit_contract) { > 2421 tcpm_pd_handle_msg(port, PD_MSG_CTRL_WAIT, port->ams); > 2422 break; > 2423 } > 2424 > 2425 if (port->state == SRC_SEND_CAPABILITIES) > 2426 tcpm_set_state(port, SRC_NEGOTIATE_CAPABILITIES, 0); > 2427 else > 2428 tcpm_pd_handle_state(port, SRC_NEGOTIATE_CAPABILITIES, > 2429 POWER_NEGOTIATION, 0); > 2430 break; > 2431 case PD_DATA_SINK_CAP: > 2432 /* We don't do anything with this at the moment... */ > 2433 for (i = 0; i < cnt; i++) > 2434 port->sink_caps[i] = le32_to_cpu(msg->payload[i]); > 2435 > 2436 partner_frs_current = (port->sink_caps[0] & PDO_FIXED_FRS_CURR_MASK) >> > 2437 PDO_FIXED_FRS_CURR_SHIFT; > 2438 frs_enable = partner_frs_current && (partner_frs_current <= > 2439 port->new_source_frs_current); > 2440 tcpm_log(port, > 2441 "Port partner FRS capable partner_frs_current:%u port_frs_current:%u enable:%c", > 2442 partner_frs_current, port->new_source_frs_current, frs_enable ? 'y' : 'n'); > 2443 if (frs_enable) { > 2444 ret = port->tcpc->enable_frs(port->tcpc, true); > 2445 tcpm_log(port, "Enable FRS %s, ret:%d\n", ret ? "fail" : "success", ret); > 2446 } > 2447 > 2448 port->nr_sink_caps = cnt; > 2449 port->sink_cap_done = true; > 2450 if (port->ams == GET_SINK_CAPABILITIES) > 2451 tcpm_set_state(port, ready_state(port), 0); > 2452 /* Unexpected Sink Capabilities */ > 2453 else > 2454 tcpm_pd_handle_msg(port, > 2455 port->negotiated_rev < PD_REV30 ? > 2456 PD_MSG_CTRL_REJECT : > 2457 PD_MSG_CTRL_NOT_SUPP, > 2458 NONE_AMS); > 2459 break; > 2460 case PD_DATA_VENDOR_DEF: > 2461 tcpm_handle_vdm_request(port, msg->payload, cnt); > 2462 break; > 2463 case PD_DATA_BIST: > 2464 port->bist_request = le32_to_cpu(msg->payload[0]); > 2465 tcpm_pd_handle_state(port, BIST_RX, BIST, 0); > 2466 break; > 2467 case PD_DATA_ALERT: > 2468 tcpm_handle_alert(port, msg->payload, cnt); > 2469 break; > 2470 case PD_DATA_BATT_STATUS: > 2471 case PD_DATA_GET_COUNTRY_INFO: > 2472 /* Currently unsupported */ > 2473 tcpm_pd_handle_msg(port, port->negotiated_rev < PD_REV30 ? > 2474 PD_MSG_CTRL_REJECT : > 2475 PD_MSG_CTRL_NOT_SUPP, > 2476 NONE_AMS); > 2477 break; > 2478 default: > 2479 tcpm_pd_handle_msg(port, port->negotiated_rev < PD_REV30 ? > 2480 PD_MSG_CTRL_REJECT : > 2481 PD_MSG_CTRL_NOT_SUPP, > 2482 NONE_AMS); > 2483 tcpm_log(port, "Unrecognized data message type %#x", type); > 2484 break; > 2485 } > 2486 } > 2487 > > --- > 0-DAY CI Kernel Test Service, Intel Corporation > https://lists.01.org/hyperkitty/list/kbuild-all@xxxxxxxxxxxx
