чт, 20 мая 2021 г. в 17:16, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>: > > On Thu, May 20, 2021 at 03:35:26PM +0300, Matwey V. Kornilov wrote: > > Hi, > > > > I am running upstream Linux 5.12.3 on an Odroid C4 board and see lots > > of the following lines in dmesg while using the gadget mass storage > > driver. I suppose that this can indicate some issue in the dwc2 > > driver. > > > > [ 189.752586] dwc2 ff400000.usb: bound driver g_mass_storage > > [ 190.118994] dwc2 ff400000.usb: new device is high-speed > > [ 190.199074] dwc2 ff400000.usb: new device is high-speed > > [ 190.267855] dwc2 ff400000.usb: new address 4 > > [ 191.310603] dwc2 ff400000.usb: dwc2_hsotg_ep_sethalt(ep > > 00000000ce48180a ep1in, 1) > > [ 191.310737] dwc2 ff400000.usb: dwc2_hsotg_start_req: ep1 is stalled > > [ 191.311015] dwc2 ff400000.usb: dwc2_hsotg_ep_sethalt(ep > > 00000000ce48180a ep1in, 0) > > [ 191.312257] dwc2 ff400000.usb: dwc2_hsotg_ep_sethalt(ep > > 00000000ce48180a ep1in, 1) > > [ 191.312373] dwc2 ff400000.usb: dwc2_hsotg_start_req: ep1 is stalled > > [ 191.312762] dwc2 ff400000.usb: dwc2_hsotg_ep_sethalt(ep > > 00000000ce48180a ep1in, 0) > > [ 191.336959] dwc2 ff400000.usb: dwc2_hsotg_ep_sethalt(ep > > 00000000ce48180a ep1in, 1) > > [ 191.447759] dwc2 ff400000.usb: dwc2_hsotg_ep_sethalt(ep > > 00000000ce48180a ep1in, 1) > > [ 191.447823] dwc2 ff400000.usb: dwc2_hsotg_start_req: ep1 is stalled > > [ 191.448098] dwc2 ff400000.usb: dwc2_hsotg_ep_sethalt(ep > > 00000000ce48180a ep1in, 0) > > [ 191.448550] dwc2 ff400000.usb: dwc2_hsotg_ep_sethalt(ep > > 00000000ce48180a ep1in, 1) > > [ 191.567748] dwc2 ff400000.usb: dwc2_hsotg_ep_sethalt(ep > > 00000000ce48180a ep1in, 1) > > Those look like they ought to be debugging messages. They don't seem to > indicate any problem. > > Alan Stern Well, I have not enabled any debug info, and those messages are flooding my dmesg. Maybe dev_warn() should be replaced with something other? -- With best regards, Matwey V. Kornilov
