[PATCH 0/4] typec switch via mux controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a follow up patch set to enable typec orientation swtich
via a simple HW block(e.g. controlled by GPIOs), the implementation
is based on Rob's commment to use existing mux controller bindings,
typec port directly use mux controller consumer API, typec_switch
struct is not used.

Last discussion is here:
https://www.spinics.net/lists/linux-usb/msg205492.html

Li Jun (4):
  dt-bindings: connector: Add typec orientation switch properties
  usb: typec: use typec cap fwnode's of_node for typec port
  usb: typec: add typec orientation switch support via mux controller
  arm64: dts: imx8mp-evk: enable usb0 with typec connector

 .../bindings/connector/usb-connector.yaml     |  21 ++++
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts  | 110 ++++++++++++++++++
 drivers/usb/typec/class.c                     |  28 ++++-
 drivers/usb/typec/class.h                     |   2 +
 drivers/usb/typec/mux.c                       |  34 ++++++
 include/linux/usb/typec_mux.h                 |   4 +
 6 files changed, 198 insertions(+), 1 deletion(-)

-- 
2.25.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux