Apologies Greg ! Will pay more attention to the "fixes" string next time.
Thanks for fixing it up !
-Badhri
On Thu, May 13, 2021 at 6:01 AM Greg Kroah-Hartman
<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> On Mon, May 10, 2021 at 02:17:56PM -0700, Badhri Jagan Sridharan wrote:
> > This is a regression introduced by
> > <1373fefc6243cc96b3565f0ffffadfac4ccfb977>
> > "Allow slow charging loops to comply to pSnkStby".
> >
> > When Source advertises Rp-default, tcpm would request 500mA when in
> > SINK_DISCOVERY, Type-C spec advises the sink to follow BC1.2 current
> > limits when Rp-default is advertised.
> > [12750.503381] Requesting mux state 1, usb-role 2, orientation 1
> > [12750.503837] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
> > [12751.003891] state change SNK_STARTUP -> SNK_DISCOVERY
> > [12751.003900] Setting voltage/current limit 5000 mV 500 mA
> >
> > This patch restores the behavior where the tcpm would request 0mA when
> > Rp-default is advertised by the source.
> > [ 73.174252] Requesting mux state 1, usb-role 2, orientation 1
> > [ 73.174749] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
> > [ 73.674800] state change SNK_STARTUP -> SNK_DISCOVERY
> > [ 73.674808] Setting voltage/current limit 5000 mV 0 mA
> >
> > During SNK_DISCOVERY, Cap the current limit to PD_P_SNK_STDBY_MW / 5 only
> > for slow_charger_loop case.
> >
> > Fixes: 1373fefc6243 ("Allow slow charging loops to comply to pSnkStby")
>
> Your string here was incorrect, I'll fix it up this time, but please be
> more careful in the future as it will get caught by our scripts.
>
> thanks,
>
> greg k-h
