From: frank zago <frank@xxxxxxxx>
The 0x5512 USB PID is for the I2C/GPIO/SPI interfaces. UART is still
present but only the TX and RX pins are available; DTS, DTR, ... are
used for other things. Remove the PID, and let a I2C driver bind to
it.
Existing CH341 boards usually have physical jumpers to switch between
the 3 modes.
This reverts commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63.
Signed-off-by: frank zago <frank@xxxxxxxx>
---
Changes from v1:
- Removed double Signed-off-by
drivers/usb/serial/ch341.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2db917eab799..235adc77ee0e 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -81,7 +81,6 @@
#define CH341_QUIRK_SIMULATE_BREAK BIT(1)
static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x1a86, 0x5512) },
{ USB_DEVICE(0x1a86, 0x5523) },
{ USB_DEVICE(0x1a86, 0x7522) },
{ USB_DEVICE(0x1a86, 0x7523) },
--
2.27.0
