Hi Mathias,
Thinh Nguyen wrote:
> This series add 3 new quirks for DWC_usb31 host mode:
> * XHCI_ISOC_BLOCKED_DISCONNECT
> * XHCI_LIMIT_FS_BI_INTR_EP
> * XHCI_LOST_DISCONNECT_QUIRK
>
> Different versions of DWC_usb3x controllers have different quirks. Typically we
> set them based on PCI device VID:PID or DT compatible strings. However, we know
> that a particular IP version(s) may share a common quirk across different
> platform. We can enable these quirks based on the IP type and version number.
> This simplifies the designer work and consolidate the logic check. To do this,
> we will need to expose the xHCI quirks to the common header along with the
> private platform structure.
>
>
> Changes in v2:
> - Instead of combining xhci-plat private structure in xhci-squirks.h, keep it
> as a separate header file
>
>
> Thinh Nguyen (7):
> usb: xhci: Move quirks definitions to common usb header
> usb: xhci: Move xhci-plat header to common usb header
> usb: xhci: Check for blocked disconnection
> usb: xhci: Workaround undercalculated BW for fullspeed BI
> usb: xhci: Rename Compliance mode timer quirk
> usb: xhci: Workaround lost disconnect port status
> usb: dwc3: host: Set quirks base on version
>
> drivers/usb/cdns3/host.c | 2 +-
> drivers/usb/dwc3/host.c | 22 +++
> drivers/usb/host/xhci-hub.c | 12 +-
> drivers/usb/host/xhci-mem.c | 26 ++++
> drivers/usb/host/xhci-plat.c | 2 +-
> drivers/usb/host/xhci-rcar.c | 2 +-
> drivers/usb/host/xhci-ring.c | 76 ++++++++++
> drivers/usb/host/xhci.c | 134 +++++++++++++-----
> drivers/usb/host/xhci.h | 71 ++--------
> .../host => include/linux/usb}/xhci-plat.h | 18 +--
> include/linux/usb/xhci-quirks.h | 65 +++++++++
> 11 files changed, 326 insertions(+), 104 deletions(-)
> rename {drivers/usb/host => include/linux/usb}/xhci-plat.h (54%)
> create mode 100644 include/linux/usb/xhci-quirks.h
>
>
> base-commit: 496960274153bdeb9d1f904ff1ea875cef8232c1
>
Did you get a chance to take a look at this series?
Thanks,
Thinh
