On 4/16/2021 4:47 PM, Artur Petrosyan wrote: > This move is done to call enter hibernation handler in > "dwc2_port_suspend()" function when core receives port suspend. > Otherwise it could be confusing to enter to hibernation in > "dwc2_hcd_hub_control()" function but other power saving modes > in "dwc2_port_suspend()" function. > > Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx> > --- > Changes in v2: > - None > > drivers/usb/dwc2/hcd.c | 18 ++++++++++++++---- > 1 file changed, 14 insertions(+), 4 deletions(-) > > diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c > index ff945c40ef8a..43a2298b7d42 100644 > --- a/drivers/usb/dwc2/hcd.c > +++ b/drivers/usb/dwc2/hcd.c > @@ -3321,6 +3321,18 @@ int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) > "enter partial_power_down failed.\n"); > break; > case DWC2_POWER_DOWN_PARAM_HIBERNATION: > + /* > + * Perform spin unlock and lock because in > + * "dwc2_host_enter_hibernation()" function there is a spinlock > + * logic which prevents servicing of any IRQ during entering > + * hibernation. > + */ > + spin_unlock_irqrestore(&hsotg->lock, flags); > + ret = dwc2_enter_hibernation(hsotg, 1); > + if (ret) > + dev_err(hsotg->dev, "enter hibernation failed.\n"); > + spin_lock_irqsave(&hsotg->lock, flags); > + break; > case DWC2_POWER_DOWN_PARAM_NONE: > /* > * If not hibernation nor partial power down are supported, > @@ -3650,10 +3662,8 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, > "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); > if (windex != hsotg->otg_port) > goto error; > - if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_HIBERNATION) > - dwc2_enter_hibernation(hsotg, 1); > - else > - dwc2_port_suspend(hsotg, windex); > + if (!hsotg->bus_suspended) > + retval = dwc2_port_suspend(hsotg, windex); > break; > > case USB_PORT_FEAT_POWER: >
